Âé¶čAV

Âé¶čAV.CA / Mechanical Engineering / About Us

Publications 2017

AMABILI, M.

Journal Publications

Balasubramanian, P., Ferrari, G., Amabili, M., Del Prado, Z.J.G.N., 2017, “Experimental and theoretical study on large amplitude vibrations of clamped rubber plates,” International Journal of Non-linear Mechanics, vol. 94, pp. 36-45.

Tubaldi, E., Amabili, M., Paidoussis, M.P., 2017, “Nonlinear dynamics of shells conveying pulsatile flow with pulse-wave propagation. Theory and numerical results for a single harmonic pulsation,” Journal of Sound and Vibration, vol. 396, pp. 217-245.

Missoum, S., Lacaze, S., Amabili, M., Alijani, F., Ìę2017, “Identification under geometric uncertainty of material properties of composite sandwich panels,”Composite Structures, vol.Ìę 179, pp. 695-704.

Davidovikj, D., Alijani, F., Cartamil-Bueno, S.J., Ìęvan der Zant, H.S.J., Amabili, M., Steeneken, P.G., 2017, “Nonlinear dynamic characterization of two-dimensional materials,” Nature Communications, vol. 8, art. 1253. DOI: 10.1038/s41467-017-01351-4

Amabili, M., 2017, “Nonlinear damping in large-amplitude vibrations: modelling and experiments,” (available online), Nonlinear Dynamics.

Breslavsky, I., Amabili, M., 2017, “Nonlinear vibrations of a circular cylindrical shell with multiple internal resonances under multi-harmonic excitation,” (available online), Nonlinear Dynamics.

Amabili, M., Lenci, S., Mikhlin, Y., Spanos, P., 2017, “A Conspectus of Nonlinear Mechanics: A Tribute to the Oeuvres of Professors G. Rega and F. Vestroni,” International Journal of Non-linear Mechanics, vol. 94, pp. 1-2.

Conferences

Amabili, M., Breslavsky, I.D., Proceedings of the 9th European Nonlinear Dynamics Conference (ENOC 2017), “Dynamics of statically pre-loaded human aorta with residual stresses,” Budapest, Hungary, paper ID 418, 25-30 June, 2017.

Amabili, M., Proceedings of the 9th European Nonlinear Dynamics Conference (ENOC 2017), “Identification of nonlinear damping for large-amplitude vibrations of plates and shells,” Budapest, Hungary, paper ID 417, 25-30 June, 2017

Alijani, F., Davidovikj, D., ÌęAmabili, M., Steeneken, P.G., Proceedings of the 9th European Nonlinear Dynamics Conference (ENOC 2017), “Non-linear dynamics for contactless characterization of graphene.,” ÌęBudapest, Hungary, paper ID 172, 25-30 June, 2017.

Breslavsky, I.D., Amabili, M., Proceedings of the ASME Summer Biomechanics, Bioengineering and Biotransport Conference, “Statics and dynamics of aortic segment with residual stresses,” Tucson, AZ, USA, paper SB3C2017-P225, 21-24 June, 2017.

Tubaldi, E., Amabili, M., Paidoussis, M.P., Proceedings of the ASME Summer Biomechanics, Bioengineering and Biotransport Conference, “Nonlinear dynamics of Dacron aortic prostheses conveying pulsatile flow,” Tucson, AZ, USA, paper SB3C2017-P232, 21-24 June, 2017.

Tubaldi, E., Amabili, M., Paidoussis, M.P., Proceedings of the 14th US National Congress on Computational Mechanics, “Fluid-Structure Interaction of Dacron Aortic Prostheses Conveying Pulsatile Flow,” Montreal, Canada, 17-20 July, 2017.

del Prado, Z.J.G.N., ÌęAmabili, M., Gonçalves, P.B., 10th International Conference on Structural Dynamics (Eurodyn), “Non linear vibrations of imperfect fluid-filled viscoelastic cylindrical shells,” Roma, Italy, published in Procedia Engineering, vol. 199, pp. 570-576,September, 2017.

Tubaldi, E., Païdoussis, M.P., Amabili, M., Proceedings of the ASME International Mechanical Engineering Congress and Exposition, (IMECE2017-71514), “Nonlinear vibrations of woven Dacron aortic prostheses conveying pulsatile flow,” Tampa, USA, November 3-9, 2017.

Balasubramanian, P., Ferrari, G., Amabili, M., Proceedings of the ASME International Mechanical Engineering Congress and Exposition, (IMECE2017-70773), “A tool to identify damping during large amplitude vibrations of viscoelastic structures,” Tampa, USA, November 3-9, 2017.Ìę

Ferrari, G., Le Guisquet, S., Balasubramanian, P., Amabili, M., Painter, B., Karazis, K., Proceedings of the ASME International Mechanical Engineering Congress and Exposition, (IMECE2017-71418), “Identification of non-linear parameters of a nuclear fuel rod,” Tampa, USA, November 3-9, 2017.

Amabili, M., Balasubramanian, P., Ferrari, G., Tubaldi, E., Proceedings of the ASME International Mechanical Engineering Congress and Exposition, (IMECE2017-70781), “Experimental investigation on the dynamic behaviour of a Dacron graft used for the treatment of descending thoracic aortic aneurism,” Tampa, USA, November 3-9, 2017.

Breslavskyi, I., Amabili, M., Tubaldi, E., Ruimi, A., Proceedings of the ASME International Mechanical Engineering Congress and Exposition, (IMECE2017-72451), “Statics and dynamics of an aortic segment considering residual stresses,” Tampa, USA, ÌęNovember 3-9, 2017.

Amabili, M., Proceedings of the 14th International Conference Dynamical Systems – Theory and Applications (DSTA2017), “Nonlinear damping: modelling and experiments,” Lodz, Poland, December 11-14, 2017.

Ìę

BALIGA, R.B.

Journal Publications

Cimmino, M., Baliga, B.R., 2017, “Evaluation of the interfacial conduction heat transfer coefficient in two-temperature macroscopic models of homogeneous porous media using a fully developed unsteady microscopic model in periodic unit cells,” Numerical Heat Transfer - Part B: Fundamentals, Vol. 71, No. 3, pp. 236-252.

Baliga B.R., Lokhmanets I., Cimmino M., 2017, “Numerical Methods for Conduction-Type Phenomena,” In: Kulacki F. (eds), Handbook of Thermal Science and Engineering. Springer, Cham, pp. 1-53.

Conferences

Lokhmanets, I., Baliga, B.R., Proceedings of the ASME Power and Energy Conference (PowerEnergy2017), “Experimental investigation of a simplified model of a transformer cooling system,” Charlotte, North Carolina, USA, June 26-30, 2017, pp. 1-11.

Lokhmanets, I., Baliga, B.R., Proceeding of the Seventh ICHMT International Symposium on Advances in Computational Heat Transfer (CHT-17), “Hybrid numerical simulations of a scaled-down simplified model of a transformer cooling system,” ÌęNapoli, Italy, May 28-June 1, 2017, pp. 1-4.

Ìę

BARTHELAT, F.

Journal Publications

Szewciw, L., Zhu, D., Barthelat, F., 2017, “The nonlinear flexural response of a whole teleost fish: contribution of scales,” Journal of the Mechanical Behavior of Biomedical Materials 17, S1751-6161 Special JMBBM issue in honor of Marc Meyers’ 70th birthday.

Martini, R., Balit, Y., Barthelat, F, 2017, “A comparative study of bio-inspired protective scales using 3D printing and mechanical testing,” Acta Biomaterialia 55, pp.360–372.

Malik, I.A., Mirkhalaf, M., Barthelat, F., 2017, “Bio-inspired “Jigsaw”-like interlocking sutures: Modeling, optimization, 3D printing and testing,” Journal of the Mechanics and Physics of Solids 102, pp.224-238.

Porter, M.M., Ravikumar, N., Barthelat, F., Martini, R., 2017, “3D printing and mechanics of bio-inspired articulated materials and flexible armor,” Journal of the Mechanical Behavior of Biomedical Materials 73 pp.114–126.

Szewciw, L., Barthelat, F., 2017, “Mechanical properties of striped bass fish skin: Evidence of an exotendon function of the stratum compactum,” Journal of the Mechanical Behavior of Biomedical Materials 73, pp.28–37.

Mirkhalaf, M., Barthelat, F., 2017, “Design, 3D printing and testing of bistable architectured materials with interlocks,” Extreme Mechanics Letters 11:1-7.

Ìę

BERGTHORSON, J.

Journal Publications

Vickery, J., Julien, P., Goroshin, S., Bergthorson, J.M., Frost, D.L., 2017, “Propagation of isobaric spherical flames in hybrid aluminum-methane fuel mixtures,” Journal of Loss Prevention in the Process Industries 49, 472-480.

Evans, M.D.G, Bergthorson, J.M., Coulombe, S., 2017, “Actuation of a lean-premixed flame by diffuse non-equilibrium pulsed nanosecond plasma at atmospheric pressure,” Journal of Applied Physics 122, 173305:1-11.

Evans, M.D.G., Baillard, V.J.P., Maqueo, P.D.G., Bergthorson, J.M., Coulombe, S., 2017, “Compact nanosecond magnetic pulse compression generator for high-pressure diffuse plasma generation,” IEEE Transactions on Plasma Science 45, 2358-2365.

Julien, P., Bergthorson, J.M., 2017, “Enabling the metal fuel economy: green recycling of metal fuels,” Sustainable Energy & Fuels 01, 615-625.

Bauwens, C.R.L., Bergthorson, J.M., Dorofeev, S.B., 2017, “Experimental investigation of spherical-flame acceleration in lean hydrogen-air mixtures,” International Journal of Hydrogen Energy 42, 7691-7697.

Lipardi, A.C.A., Versailles, P., Watson, G.M.G., Bourque, G., ÌęBergthorson, J.M., 2017, “Experimental and numerical study on NOx formation trends in CH4-air mixtures diluted with exhaust gas components at constant flame temperatures,”Ìę Combustion & Flame 179, 325-337.

Soo, M.J., Goroshin, S., Glumac, N., Kumashiro, K., Vickery, J., Frost, D.L., Bergthorson, J.M., 2017, “Emission and laser absorption spectroscopy of flat flames in aluminum suspensions,” Combustion & Flame 180, 230-238.

Fischer, P., Schiemann, M., Bergthorson, J.M., Scherer, V., Schmid, G., Taroata, D., 2017, “Experimental investigations on the combustion of lithium particles in CO2 and CO2-N2 mixtures,” Fuel 199, 28-37.

Bauwens, C.R., Bergthorson, J.M., Dorofeev, S.B., 2017, “On the interaction of the Darrieus-Landau instability with weak initial turbulence,” Proceedings of the Combustion Institute 36, 2815-2822.

Watson, G.M.G., Versailles, P., Bergthorson, J.M., 2017, “Prompt NO formation in rich premixed flames of C1 to C4 alkanes and alcohols,” Proceedings of the Combustion Institute 36, 627-635.

Mi, X., Higgins, A.J., Goroshin, S., Bergthorson, J.M., 2017, “The influence of spatial discreteness on the thermo-diffusive instability of flame propagation with infinite Lewis number,” Proceedings of the Combustion Institute 36, 2359-2366.

Soo, M.J., Kumashiro, K., Goroshin, S., Frost, D.L., Bergthorson, J.M., 2017, “Thermal structure of flames in non-volatile fuel suspensions,” Proceedings of the Combustion Institute 36, 2351-2358.

Julien, P., Whiteley, S., Soo, M.J., Goroshin, S., Frost, D.L., Bergthorson, J.M., 2017, “Flame speed measurements in aluminum suspensions using a counterflow burner,” Proceedings of the Combustion Institute 36, 2291-2298.

Bergthorson, J.M., Yavor, Y., Palecka, J., Georges, W., Soo, M.J., Vickery, J., Goroshin, S., Frost, D.L., Higgins, A.J., 2017, “Metal-water combustion for clean propulsion and power generation,” Applied Energy 186, 13-27.

Trowell, K.A., Wang, J., Wang, Y., Yavor, Y., Goroshin, S., Bergthorson, J.M., Frost, D.L., St-Charles, J.C., ÌęÌęDubois, C., 2017, “Effect of particle coating on the thermal response of mixtures of micro and nano-aluminum particles and water,” Journal of Thermal Analysis & Calorimetry 127, 1027-1036.

Schiemann, M., Fischer, P., Bergthorson, J.M., Schmid, G., Taroata, D., 2017, “Combustion of Lithium particles in N2: Reaction rates,” Combustion Science & Technology 189, 169-186.

Conferences

Bergthorson, J.M., Proceedings of the 10th Mediterranean Combustion Symposium, “Beyond batteries — metals as zero-carbon recyclable fuels,” Naples, Italy, 2017.

Soo, M.J., Mi, X.C., Goroshin, G.S., Bergthorson, J.M., Proceedings of the 10th Mediterranean Combustion Symposium, “A thermophysical approach to the ignition of particles, suspensions, and agglomerates,” Naples, Italy, 2017.

Bauwens, C.R., Bergthorson, J.M., Dorofeev, S., Proceedings of the 26th International Colloquium on the Dynamics of Explosions and Reactive Systems, “Modeling the growth and formation of instabilities during spherical flame propagation,” Boston, MA, 2017.

Palecka, J., Goroshin, S., Bergthorson, J.M., Higgins, A.J., Proceedings of the 26th International Colloquium on the Dynamics of Explosions and Reactive Systems,Ìę “ Propagation limits of flames in binary fuel mixtures,” Boston, MA, 2017.

Palecka, J., Goroshin, S., Bergthorson, J.M., Higgins, A.J., Proceedings of the 26th International Colloquium on the Dynamics of Explosions and Reactive Systems , “An overview of PERWAVES: A sounding rocket experiment to examine flame propagation in the discrete regime,” Boston, MA, 2017.

Vickery, J.,Ìę Julien, P., Goroshin, S., Bergthorson, J.M., Frost, D.L., Proceedings of the 26th International Colloquium on the Dynamics of Explosions and Reactive Systems, “Spherically-expanding flames in hybrid aluminum-methane-oxidizer mixtures at atmospheric pressure,” Boston, MA, 2017.

Soo, M.J., Goroshin, S., Lightstone, J., Frost, D.L., Bergthorson, J.M., Proceedings of the 26th International Colloquium on the Dynamics of Explosions and Reactive Systems,. “The inability of heterogeneously reacting particles to ignite below a critical size,” Boston, MA, 2017.

Jella, S., Bergthorson, J.M., Gauthier, P., Bourque, G., Bulat, G., Rogerson, J., Sadasivuni, S., Proceedings of the ASME Turbo Expo 2017, “Large eddy simulations of a pressurized, partially-premixed swirling flame with finite-rate chemistry,” ASME paper GT2017-65256. Charlotte, North Carolina, 2017.

Abbasi-Atibeh, E., Salusbury, S.D., Bergthorson, J.M., Proceedings of the ASME Turbo Expo 2017, “The effect of Lewis number on instantaneous flamelet speed and position statistics in counter-flow flames with increasing turbulence,” ASME paper GT2017-64821. Charlotte, North Carolina, 2017.

Versailles, P., Watson, G.M.G, Durocher, A., Bourque, G.,Ìę Bergthorson, J.M., Proceedings of the ASME Turbo Expo 2017, “Thermochemical mechanism optimization for accurate predictions of CH concentrations in premixed flames of C1-C3 alkane fuels,” ASME paper GT2017-64995. Charlotte, North Carolina, 2017.

Ìę

DRISCOLL, M.

Journal Publications

Driscoll, M., 2018, “Fascia- The Unsung Biomechanical Hero of our Musculoskeletal System,” JBMT; 22: 90-91.

Ìę

FORBES, J.

Journal Publications

Chee, S. A. , Forbes, J.R., 2017, “Discrete-Time Minmax Filtering Subject to a Norm- Constrained State Estimate,” Automatica, vol. 85, pp. 477–480, November 2017.

Walsh, A., ÌęForbes, J.R., Chee, S. A., Ryan, J.J., 2017, “Kalman Filter Based Unconstrained and Constrained Extremum-Seeking Guidance on SO(3),” AIAA Journal of Guidance Control and Dynamics, vol. 40, no. 9, pp. 2260–2271,

de Ruiter, A. H. J., Forbes, J.R., 2017, “Continuous-Time Kalman Filtering on the Orthogonal Group O(n),” International Journal of Robust and Nonlinear Control, vol. 27, no. 17, pp. 3466–3487, DOI: 10.1002/rnc.3744.

Bridgeman, L. J., Forbes, J.R., 2017, “Conic Bounds for Systems Subject to Unknown Delay,” IEEE Transactions on Automatic Control, vol. 62, no. 4, pp. 2006–2013.

Caverly, R. J., Forbes, J.R., 2017, “Dynamic Modeling, Trajectory Optimization, and Control of a Flexible Kiteplane,” IEEE Transactions on Control Systems Technology, vol. 25, no. 4, pp. 1297–1306.

Walsh, A., Forbes, J.R., 2017, “Analysis and Synthesis of Input Strictly Passive Gain-Scheduled Controllers,” Journal of the Franklin Institute, vol. 354, pp. 1285–1301, February.

Zlotnik, D. E., Forbes, J.R., 2017, “Nonlinear Estimator Design on the Special Orthogonal Group using Vector Measurements Directly,” IEEE Transactions on Automatic Control, vol. 62, no. 1, pp. 149– 160.

de Ruiter, A. H. J., Forbes, J.R., 2017, “Discrete-Time SO(n)-Constrained Kalman Filtering,” AIAA Journal of Guidance Control and Dynamics, vol. 40, no. 1, pp. 28–37.

Conferences

Forbes, J.R., Zlotnik, D.E., 3rd conference on Geometric Science of Information (GSI 2017), SociĂ©tĂ© MathĂ©matique de France, “Sigma Point Kalman Filtering on Matrix Lie Groups,” Paris, France, November 7–9, 2017.

Bering, E., Andersson, L. , Chen, J., Cutler, J., Hara, K., Jackson, D., Lemmon, M., Pinsky, L., ÌęShee- han, J., ÌęSiddiqui, U., ÌęStoneback, R., ÌęWithers, P., ÌęHeelis, R., Moldwin, M., Reed, H., Forbes, J.R., AIAA SPACE and As- tronautics Forum and Exposition, “Trimetric Imaging of the Martian Ionosphere using a CubeSat Constellation ,” Orlando, FL, USA, September 12-14, 2017.

Chee, S. A., Bridgeman, L. J., Forbes, J.R., IEEE Conference on Control Technology and Applications, “Norm- and Linear-Inequality-Constrained State Estimation: An LMI Approach,” Kohala Coast, HI, USA, August 27–30, 2017.

Godbole, H. A., Caverly, R. J., Forbes, J.R., Third International Conference on Cable-Driven Parallel Robots, “Modelling of Flexible Cable-Driven Parallel Robots using a Rayleigh-Ritz Approach,” Quebec City, QC, August 2-4, 2017.

Caverly, R. J., Forbes, J.R., 20th IFAC World Congress, “Nyquist Interpretation of the Large Gain Theorem,” Toulouse, France, July 9–14, 2017.

Bridgeman, L. J., ÌęForbes, J.R., American Control Conference, “Conic Controller Synthesis that Minimizes an Upper Bound on the Closed-Loop H2-Norm,” Seattle, WA, USA, May 24-26, 2017.

Caverly, R. J., Forbes, J.R., American Control Conference, “Regional Pole and Zero Placement with Static Output Feedback via the Modified Minimum Gain Lemma,” Seattle, WA, USA, May 24-26, 2017.

Walsh, A., Ryan, J. J., Forbes, J.R., American Control Conference, “Constrained Extremum-Seeking Guidance Using a Con- strained Kalman Filter,” Seattle, WA, USA, May 24-26, 2017.

Caverly, R. J., Forbes, J.R., Danowsky, B. P., Suh, P. M., AIAA Science and Technology Forum and Exposition 2017, “Gust-Load Alleviation of a Flexible Aircraft using a Disturbance Observer,” Gaylord Texan, Grapevine, TX, USA, January 9–13, 2017.

Chee, S. A., ÌęForbes, J.R., AIAA Science and Technology Forum and Exposition 2017, “Norm-Constrained Forward-Backward Smoothing,” Gaylord Texan, Grapevine, TX, USA, January 9–13, 2017.

Ìę

FROST, D.

Journal Publications

Vickery, J., Julien, P., Goroshin, S., Bergthorson, J.M., Frost, D.L., 2017, “Propagation of isobaric spherical flames in hybrid aluminum-methane fuel mixtures,” Journal of Loss Prevention in the Process Industries, Vol. 49, pp. 472-480, DOI: 10.1016/j.jlp.2017.05.027.

Soo, M., Goroshin, S., Glumac, N., Kumashiro, K., Vickery, J., Frost, D. L., Bergthorson, J. M., 2017, “Emission and laser absorption spectroscopy of flat flames in aluminum suspensions,” Combustion and Flame, Vol. 180, pp. 230-238.

Bergthorson, J. M., Yavor, Y., Palecka, J., Georges, W., Soo, M., Vickery, J., Goroshin, S., Frost, D. L., Higgins, A. J., 2017, “Metal-water combustion for clean propulsion and power generation,” Applied Energy, Vol. 186, Part 1, pp. 13-17.

Milne, A., Longbottom, A., Frost, D. L., Loiseau, J., Goroshin, S., Petel, O., Ìę2017,“Explosive fragmentation of liquids in spherical geometry,” Shock Waves, Vol. 27, Issue 3, 2017, pp. 383-393.

Soo, M. J., Kumashiro, K., Goroshin, S., Frost, D. L., Bergthorson, J. M., 2017, “Thermal structure of flames in non-volatile fuel suspensions,” Proceedings of the Combustion Institute, Vol. 36, Issue 2, pp. 2351-2358.

Trowell, K. A., Wang, J., Wang, Y., Yavor, Y., Goroshin, S., Bergthorson, J. M., Frost, D. L., St-Charles, J. C., ÌęDubois, C., 2017, “Effect of particle coating on the thermal response of mixtures of micro- and nano-aluminum particles with water,” Journal of Thermal Analysis and Calorimetry, Vol. 127, Issue 1, pp. 1027-1036.

Julien, P., Whiteley, S., Soo, M., Goroshin, S., Frost, D. L., Bergthorson, J. M., 2017, “Flame speed measurements in aluminum suspensions using a counterflow burner,” Proceedings of the Combustion Institute, Vol. 36, Issue 2, pp. 2291-2298.

Conferences

Trowell, K., Goroshin, S., Frost, D. L., Bergthorson, J., Proceedings of the Materials Research Society Fall Meeting, “Aluminum-water reactions for hydrogen production using liquid and supercritical water – 200ÂșC – 400ÂșC,” Boston, MA, Nov. 26 – Dec. 1, 2017.

Vickery, J., Julien, P., Goroshin, S., Bergthorson, J., Frost, D. L., Proceedings of 26th International Colloquium on the Dynamics of Explosions and Reactive Systems, “Spherically-expanding flames in hybrid aluminum-methane-oxidizer mixtures at atmospheric pressure,” Boston, MA, July 30 – August 4, 2017.

Soo, M., Goroshin, S., Lightstone, J., Frost, D. L., Bergthorson, J., Proceedings of 26th International Colloquium on the Dynamics of Explosions and Reactive Systems, “The inability of heterogeneously reacting particles to ignite below a critical size,” Boston, MA, July 30 – August 4, 2017.

Pontalier, Q., Lhoumeau, M., Frost, D. L., Proceedings of the 21st APS Topical Meeting on Shock Compression of Condensed Material, “Blast wave mitigation in granular materials,” St. Louis, MO, June 9 – 14, 2017.

Loiseau, J., Georges, W., Frost, D. L., Higgins, A. J., Proceedings of the 21st APS Topical Meeting on Shock Compression of Condensed Material, “Scaling of the propulsive capability of aluminized gelled nitromethane,” St. Louis, MO, June 9 – 14, 2017.

Loiseau, J., Georges, W., Frost, D. L., Higgins, A. J., Proceedings of the 21st APS Topical Meeting on Shock Compression of Condensed Material, “Non-Gurney scaling of explosives heavily loaded with dense inert additives,” St. Louis, MO, June 9 – 14, 2017.

Marr, B. J., Loiseau, J., Goroshin, S., Frost, D. L., Proceedings of the 21st APS Topical Meeting on Shock Compression of Condensed Material, “Suppression of jet formation during explosive dispersal of concentric particle layers,” St. Louis, MO, June 9 – 14, 2017.

Pontalier, Q. T., Lhoumeau, M. G., Frost, D. L., Proc. 31st International Symposium on Shock Waves, “Non-ideal blast waves from particle-laden explosives,” Nagoya, Japan, July 9 14, 2017.

Ìę

HABASHI, W.

Journal Publications

Kelly, D., Quaranta, G., Fossati, M., Masarati, P., Habashi, W.G., 2017, “Ice Accretion Effects on Helicopter Rotor Performance, via Multi-body and CFD Approaches”, AIAA Journal of Aircraft, October 2017.

Gao, S., Habashi, W.G., Isola, D., Baruzzi, G.S., Fossati, M., 2017, “A Jacobian-Free Edge-based Galerkin Formulation for Compressible Flows” Computers & Fluids, Vol. 143, pp. 141-156.

Zhang, W., Habashi, W.G., Salah, N.B., Baruzzi, G.S., Isola, D., 2017, “Edge-based Finite Element Formulation of Hypersonic flows Under an Imposed Magnetic Field”, AIAA Journal, 2017-05-J056368.R1.

Habashi, W.G., Dow, J.P., Sr., 2017, “Icing Certification: Time to Consider 3D CFD”, Invited Paper, ICAO Journal, Volume 72, No.1, pp. 38-40, June.

Dumas, M-E., Habashi, W.G., Baruzzi, G.S., Isola, D., Fossati, M., 2017, “Finite Element Modeling of Non-equilibrium Fluid-Wall Interaction at High-Mach Regime”, AIAA Journal of Aircraft, May, DOI: 10.2514/1.C034211.

Conferences

Zhang, W., Habashi, W.G., Fossati, M., Ben Salah, N., Baruzzi, G.S., Isola, D., “Edge-Based FEM of Electromagnetic Effects in Hypersonic Flows”, CFD 2017-408, 25th Annual Conference of the CFD Society of Canada, Windsor, Ontario, June 2017.

Gao, S., Habashi, W.G., Fossati, M., Isola, D., Baruzzi, G.S., 55th AIAA Aerospace Sciences Meeting, “Finite-Element Formulation of a Jacobian-free Solver for Supersonic Viscous Flows on Hybrid Grids,” AIAA Paper 2017-0085, Grapevine, Texas, January 2017.

Nathoo, M., Habashi, W.G., Fossati, M., 55th AIAA Aerospace Sciences Meeting, Grapevine, “Stitching and Deformation of Non-overlapping Meshes for Unsteady Rotocraft Aerodynamics”, AIAA Paper 2017-0582, Texas, January 2017.

Ìę

HIGGINS, A.

Journal Publications

Georges, W., Loiseau, J., Higgins, A.J., Zimmermann, J., 2017, “Effect of Scale, Material Strength, and Loading on Ejecta Formation from Explosively Driven Aluminum,” Journal of Dynamic Behavior of Materials, Vol. 3(4), 2017, pp 485–496.

Lam, F., Mi, X., Higgins, A.J, 2017, “Front Roughening of Flames in Discrete Media,” Physical Review E, Vol. 96, 013107.

Mi, X., Higgins, A.J, Ng, H.D., Kiyanda, C.B., Nikiforakis, N., 2017, “Propagation of Gaseous Detonation Waves in a Spatially Inhomogeneous Reactive Medium,” Physical Review Fluids, Vol. 2, 053201.

Mi, X., Timofeev, E.V., Higgins, A.J, 2017, “Effect of Spatial Discretization of Energy on Detonation Wave Propagation,” Journal of Fluid Mechanics, Vol. 817, 2017, pp. 306-338.

Mi, X., Higgins, A.J, Goroshin, S., and Bergthorson, J.M., 2017, “The influence of spatial discreteness on the thermo-diffusive instability of flame propagation with infinite Lewis number,” Proceedings of the Combustion Institute, Vol. 36, No. 2, pp. 2359-2366.

Bergthorson, J.M., Yavor, Y., Palecka, J., Georges, W., Soo, M., Vickery, J., Goroshin, S., Frost, D.L., and Higgins, A.J, 2017, “Metal-water combustion for clean propulsion and power generation,” Applied Energy, Volume 186, Part 1, pp. 13–27.

Conferences

Mi, X., Ng, H.D., Kiyanda, C.B., Higgins, A.J., Nikiforakis N., 26th International Colloquium on the Dynamics of Explosions and Reactive Systems, “On the Averaging Analysis for Unstable Detonations,” Boston, USA, July 30–Aug. 4, 2017.

Mi, X., Higgins, A.J., Ng, H.D., Kiyanda, C.B., Nikiforakis N., 26th International Colloquium on the Dynamics of Explosions and Reactive Systems, “Effect of Spatial Inhomogeneities on the Propagation Limit of Gaseous Detonations,” Boston, USA, July 30–Aug. 4, 2017.

Palecka, J., Goroshin, S., Bergthorson, J.M., Higgins, A.J, 26th International Colloquium on the Dynamics of Explosions and Reactive Systems, “Propagation Limits of Flames in Binary-Fuel Mixtures,” Boston, USA, July 30–Aug. 4, 2017.

Knowlen, C., Byrd, T., Dumas, J., Daneshvaran, N., Bruckner, A.P., Higgins, A.J, 26th International Colloquium on the Dynamics of Explosions and Reactive Systems, “Baffled Tube Ram Accelerator Combustion,” Boston, USA, July 30–Aug. 4, 2017.

Kiyanda, C.B., Connolly-Boutin, S., Joseph, V., Mi, X., Ng, H.D., Higgins, A.J., 26th International Colloquium on the Dynamics of Explosions and Reactive Systems, “Small Size Rotating Detonation Engine: Scaling and Minimum Mass Flow Rate,” Boston, USA, July 30–Aug. 4, 2017.

Lam, F., Mi, X., and Higgins, A.J., 26th International Colloquium on the Dynamics of Explosions and Reactive Systems, “Dimensional Scaling for Propagation in Particulate Clouds with Lateral and Volumetric Losses,” Boston, USA, July 30–Aug. 4, 2017.

Higgins, A.J., Loiseau, J., Mi, X., 20th Biennial Conference of the APS Topical Group on Shock Compression of Condensed Matter, “Detonation Velocity–Diameter Relation in Gelled Explosive with Inert Inclusions,” St. Louis, Missouri, July 9–14, 2017.

Loiseau, J., Higgins, A.J, Frost, D., 20th Biennial Conference of the APS Topical Group on Shock Compression of Condensed Matter, “Non-Gurney Scaling of Explosives Heavily Loaded with Dense Inert Additives,” St. Louis, Missouri, July 9–14, 2017.

Franco Navarro, P., Chiu, P.H., Higgins, A.J., Serge, M., Benson, D., Nesterenko, V., 20th Biennial Conference of the APS Topical Group on Shock Compression of Condensed Matter, “Shear localization in 4340 steel with different microstructure using Thick Wall Cylinder method,” St. Louis, Missouri, ÌęJuly 9–14, 2017,.

Huneault, J., Kamil, J., Higgins, A.J, and Plant, D., 20th Biennial Conference of the APS Topical Group on Shock Compression of Condensed Matter, “Dynamic Tensile Strength of Silicone Oils,” St. Louis, Missouri, July 9–14, 2017.

Loiseau, J., Higgins, A.J., Frost, D., and Zhang, F., 20th Biennial Conference of the APS Topical Group on Shock Compression of Condensed Matter, “Scaling of the Propulsive Capability of Aluminized Gelled Nitromethane,” St. Louis, Missouri, July 9–14, 2017.

Ìę

HUBERT, P.

Journal Publications

Visweswaraiah, S. B., Lessard, L., Hubert, P., 2017,“Interlaminar Shear Behaviour of Hybrid Fibre Architectures of Randomly Oriented Strands Combined with Laminate Groups”, Composite Structures, 176, 823-832.

Visweswaraiah, S. B., Ohlmann, N., Lessard, L., Hubert, P., 2017,“Flow-control and Hybridization strategies Strategies for Compression moulded Moulded T-shaped parts Parts Fabricated with Randomly Oriented Strands”, Journal of Reinforced Plastics and Composites, 36 (18), 1327-1342.

Smith, A. W., Hubert, P., 2017, “Recycling of Uncured Prepreg Waste Via Long Discontinuous Fibre Compression Moulding: A Study of Flow Phenomena Interaction”, SAMPE Journal, 53 (5), 18-23.

Picher-Martel, G.-P., Levy, A., Hubert, P., 2017, “Compression Molding of Carbon/Polyether ether ketone Composites: Squeeze Flow Behavior of Unidirectional and Randomly-Oriented Strands”, Polymer Composites, 38 (9), 1828-1837.

Weiland, J., Hubert, P., Hinterhölzl, R., 2017, “Thermal dimensioning of manufacturing moulds with multiple resistively heated zones for composite processing”, Journal of Composite Materials, 51 (28), 3969-3986.

Helmus, R., Kratz, J., Potter, K., Hubert, P., Hinterhölzl, R., 2017, “An Experimental Technique to Characterize Interply Void Formation in Unidirectional Prepregs”, Journal of Composite Materials, 51 (5), 579-591.

Conferences

Hubert, P., PrĂ©au, M., MacLean, A., 21st International Conference on Composite Materials (ICCM-21), “Development of Robust Repair Protocols for Composite Aircraft Structures,” Xian, China, August 21 – 25 2017.

Hubert, P., Schubert, J., Bickerton, S., Hickey, C., 21st International Conference on Composite Materials (ICCM-21), “Towards a Design Guideline for Corners in Composite Parts,” Xian, China, August 21 – 25 2017.

Liu, D., Hubert, P., CANCOM 2017, “Characterization of the Bulk Factor of Out-of-autoclave Prepregs for Space Applications,” Ottawa, ON, July 17-20 2017.

Visweswaraiah, S., Lessard, L., Hubert, P., CANCOM 2017, “Effects of Hybridization of Laminates with Randomly Oriented Strands at Coupon and Part levels,” Ottawa, ON, July 17-20 2017.

Barroeta Robles, J., Rousseau, C., Hubert, P., CANCOM 2017,”Material Characterization to Evaluate the Suitability of Out-of-autoclave Semipregs for Structural Space Applications,” Ottawa, ON, July 17-20 2017.

Smith, A., Poirier, D., Hubert, P., CANCOM 2017, “A Unidimensional Flow and Consolidation Characterization of Recycled Prepregs,” Ottawa, ON, July 17-20 2017.

Collins, C., Hubert, P., CANCOM 2017, “Dimensional Stability in Compression Moulded Discontinuous Long Fibre Carbon/PEEK Composites,” Ottawa, ON, July 17-20 2017.

Hubert, P., PrĂ©au, M., MacLean, A., Twenty-fifth International Conference on Processing and Fabrication of Advanced Materials (PFAM-XXV), “Processing Challenges During Co-bonded Repairs of Composites Aircraft Structures”, Auckland, New Zealand, January 23-25, 2017.

Ìę

KOKKOLARAS, M.

Journal Publications

Talgorn, B., Kokkolaras, M., 2017, “Compact Implementation of Non-hierarchical Analytical Target Cascading for Coordinating Distributed Multidisciplinary Design Optimization Problems,” Structural and Multidisciplinary Optimization, DOI 10.1007/s00158-017-1726-0.

Chamseddine, I., Kokkolaras, M., 2017, “Bio-inspired Heuristic Network Configuration in Air Transportation System-of-Systems Design Optimization,” ASME Journal of Mechanical Design, 139(8), DOI 10.1115/1.4036778.

Audet, C., Kokkolaras, M., Talgorn, B., Le Digabel, S., 2017, “Order-based Error for Managing Ensembles of Surrogates in Derivative-free Optimization,” Journal of Global Optimization, DOI 10.1007/s10898-017-0574-1.

Tournemenne, R., Petiot, J.-F., Talgorn, B., Kokkolaras, M., 2017, “Brass Instruments Design Using Physics-based Sound Simulation Models and Surrogate-assisted Derivative-free Optimization,” ASME Journal of Mechanical Design, 139(4), DOI 10.1115/1.4035503.

Stefanova, M., Yakunin, S. , Petukhova, M., Lupuleac, S., Kokkolaras, M., 2017, “An Interior Point Method-based Solver for Simulation of Aircraft Parts Riveting," Engineering Optimization, DOI 10.1080/0305215X.2017.1355367.

Conferences

Goncalves, C., Kokkolaras, M., Proceedings of the 21st International Conference on Engineering Design, “Modeling the Relationship between Aviation Original Equipment Manufacturers and Maintenance, Repair and Overhaul Enterprises from a Product-Service System Perspective,” Vancouver, British Comumbia, Canada, August 21-25, 2017.

Visakha, R., Kokkolaras, M., Isaksson, O., Proceedings of the 21st International Conference on Engineering Design, “An Approach for early Product Architecture Decisions for Integrated Aerospace Components Using a Multidisciplinary Design Optimization Technique,” Vancouver, British Comumbia, Canada, August 21-25, 2017.

Bayoumy, A., Kokkolaras, M., Proceedings of the 43rd ASME Design Automation Conference, “A reference error formulation for multi-fidelity design optimization,” Cleveland, Ohio, paper no. DETC2017/DAC-67843, August 6-9, 2017.

Ìę

KÖVECSES, J.

Journal Publications

Mohtat, A., Gallacher, C., Kövecses, J., 2017, “A Control-Oriented Framework for Direct Impulse-based Rendering of Haptic Contacts,” ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 140, No. 3, pp. 031002_1-10.

Callejo, A., Gholami, F., Enzenhöfer, A., Kövecses, J., 2017, “Unique Minimum Norm Solution to Redundant Reaction Forces in Multibody Systems,” Mechanism and Machine Theory, Vol. 116, pp. 310–325.

Gholami, F., Trojan, D.A., Kövecses, J., Haddad, W.M., Gholami, B., 2017, “A Microsoft Kinect-Based Point-of-Care Gait Assessment Framework for Multiple Sclerosis Patients,” IEEE Journal of Biomedical and Health Informatics, Vol. 21, No. 5, pp. 1376-1385.

Gholami, F., Kövecses, J., 2017, “An Eigenvector-Based Approach for Improved Parameter Variation for Multibody Mechanical Systems,” Mechanics Based Design of Structures and Machines, 45, pp. 127-134.

Budai, Cs., Kovacs, L., Kövecses, J., Stepan, G., 2017, “Effect of Dry Friction on Vibrations of Sampled-Data Mechatronic Systems,“ Nonlinear Dynamics, Vol. 88, pp 349-361.

Callejo, A., Arbatani, S., Kövecses, J., Kalantari, M., Marchand, N.R., 2017, “Drill Bit Contact Dynamics Including Side Cutting: Simulation and Validation,” ASME Journal of Energy Resources Technology, Vol. 139, 022910 (7 pages).

Hewlett, J, Kovacs, L., Callejo, A., Kry, P., Kövecses, J., Angeles, J., 2017, “Adaptive Semi-implicit Integrator for Articulated Mechanical Systems,” ASME Journal of Computational and Nonlinear Dynamics, Vol. 12, 051003 (10 pages).

Callejo, A., Pan, Y., Ricon, J.L., Kövecses, J., Garcia de Jalon, J., 2017, “Comparison of semi-recursive and subsystem synthesis algorithms for the efficient simulation of multibody systems,” ASME Journal of Computational and Nonlinear Dynamics, Vol. 12, No. 1, 011020 (11 pages).

Gholami, F., Nasri, M., Kövecses, J., Teichmann, M., 2017, “A Fast Algorithm for Contact Dynamics of Multibody Systems Using the Box Friction Model,” ASME Journal of Computational and Nonlinear Dynamics, Vol. 12, No. 1, 011016 (11 pages).

Mashayekhi, M.J., ÌęKövecses, J., 2017, "A comparative study between the augmented Lagrangian method and the complementarity approach for modeling the contact problem,” Multibody System Dynamics, Vol. 40, No. 4, pp 327–345.

Conferences

Peiret, A., Kövecses, J., Font-Llagunes, J. M., 2017 ASME International Design Engineering Technical Conferences, “A Friction Model for Non-singular Complementarity Formulations for Multibody Systems with Contacts,”Ìę Cleveland, Ohio, USA, August 6-9, 2017.

Hewlett, J., Kövecses, J., and Angeles, J., ÌęIEEE/RSJ 2017 International Conference on Intelligent Robots and Systems (IROS), “A Method to Enforce Stiff Constraints in the Simulation of Articulated Multibody Systems,” ÌęVancouver, BC, Canada, Sep. 24-28, 2017.

Enzenhöfer, A., Andrews, S., Teichmann, M., Kövecses, J., 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems IROS 2017, “Comparison of Mixed Linear Complementarity Problem Solvers in Multibody Simulations with Contact,” Vancouver, BC, Canada, September 24-28, 2017.

Peiret, A., Kövecses, J., Font-Llagunes, J. M., IEEE/RSJ 2017 International Conference on Intelligent Robots and Systems (IROS), “On the Solvability of Dynamic Formulations for Multibody Systems with Contacts and Coulomb Friction,” Vancouver, BC, Canada, Sep. 24-28, 2017.

Vu, D-S, Kövecses, J., Gosselin, C., IEEE 2017 World Haptics Conference, “Trajectory planning and control of a belt-driven locomotion interface for flat terrain walking and stair climbing,” pp. 189-194, Munich, Germany, June 6-9, 2017.

Peiret, A., Kovacs, L. L., Holz, D., Teichmann, M., Kövecses, J., 19th International Conference of the ISTVS, “Dynamic simulation of wheeled vehicles: models and algorithms,” Budapest, Hungary, September 25-27, 2017.

Enzenhöfer, A., Teichmann, M., Kövecses, J., ÌęThe 9th European Nonlinear Dynamics Conference ENOC 2017, “Analysis of Pivoting Algorithms for LCPs in Redundant Contact Dynamics,” Budapest, Hungary, June 25-30, 2017.

Peiret, A., Kövecses, J., Font-Llagunes, J. M., The 9th European Nonlinear Dynamics Conference, “The Discretized Coulomb Friction Model in a Non-singular Complementarity Formulation for Multibody Systems with Contacts,” Budapest, Hungary, June 25-30, 2017.

Budai, Cs., Kovacs, L.L., Kövecses, J., StĂ©pĂĄn, G., 9th European Nonlinear Dynamics Conference ENOC 2017, “Vibration decay and positioning time of sampled-data systems with dry friction,” Budapest, Hungary, June 25-30, 2017.

Gogh, L., Mohácsi, B., Kovács, L.L., Kövecses, J., 9th European Nonlinear Dynamics Conference ENOC 2017, “Inertia properties and their role in haptic rendering", Budapest, Hungary, June 25-30, 2017.

Enzenhöfer, A., Teichmann, M., Kövecses, J., The 8th ECCOMAS Thematic Conference on Multibody Dynamics, “Geometrical Interpretation of LCP Pivoting in Contact Dynamics,” Prague, Czech Republic, June 18-22, 2017.

Peiret, A., Kövecses, J., Font-Llagunes, J. M., 8th ECCOMAS Thematic Conference on Multibody Dynamics, “On the Generalized Friction Cone for Multibody Systems,” Prague, Czech Republic, June 19-22, 2017.

Peiret, A., Hewlett, J., Kovacs, L. L., Kövecses, J., IUTAM Symposium on Co-Simulation and Solver Coupling, “Dynamic Interface Modelling for Co-simulation of Multibody Systems,” Darmstadt, Germany, September 18-20, 2017.

Mohtat, A., Arbatani, S., Gonzalez, F., Kövecses, J., IUTAM Symposium on Co-simulation and Solver Coupling, “Enhancing the Stability of Co-simulation via an Energy-leak Monitoring and Dissipation Framework,” Darmstadt, Germany, Sep. 18-20, 2017.

Gholami, F., Kövecses, J., Teichmann, M., Int. Workshop on Research Challenges in Mechanics: Applications of Automated Computational Modeling, RCM 2017, “On the performance improvement of real-time simulation of large-scale multibody systems", Hannover, Germany, March 1-2, 2017.

Ìę

LEE, T.

Journal Publications

Lee, T., Ko, L.S., 2017, “Ground effect on the vortex flow and aerodynamics of a slender delta wing,” ASME Journal of Fluids Engineering; published online DOI: 10.1115/1.4039232; pp. 1-10.

Lee, T., Tremblay-Dionne, V., Ko, L.S., 2017, “Ground effect on a slender reverse delta wing with anhedral,” Journal of Aerospace Engineering; published online DOI: 10.1177/0954410017754147; pp. 1-10.Ìę

Lee, T., and Tremblay-Dionne, V., 2017, “Experimental investigation of the aerodynamics and flow field of a NACA 0015 airfoil over a wavy ground,” ASME Journal of Fluids Engineering; published online DOI: 10.1115/1.4039236; pp. 1-9.

Lee, T., Tremblay-Dionne, V., and Ko, L.S., 2017, “Impact of anhedral on a reverse delta wing,” Journal of Aerospace Engineering; published online DOI: 10.1177/0954410017715047,pp. 1-9.

Lee, T., Majeed, A., Siddiqui, B., and Tremblay-Dionne, V., 2017, “Impact of ground proximity on the aerodynamic properties of an unsteady airfoil,” Journal of Aerospace Engineering; published online DOI: 10.1177/0954410017703416; pp. 1-17.

Lee, T., Ko, L.S., 2017, “Vortex flow and lift generation of a non-slender reverse delta wing,” Journal of Aerospace Engineering, Vol. 231, Issue 13, pp. 2438-2451.Ìę

Ìę

LEGRAND, M.

Journal Publications

Legrand, M., Junca, S., Heng. S., 2017, “Nonsmooth modal analysis of a N-degree-of-freedom system undergoing a purely elastic impact law,” Communications in Nonlinear Science and Numerical Simulation, Elsevier, 45, pp.190-219.

Thorin, A., Delezoide, P., Legrand, M., 2017,“Non-smooth modal analysis of piecewise-linear impact oscillators,” SIAM Journal on Applied Dynamical Systems, Society for Industrial and Applied Mathematics.

Batailly, A., ÌęLegrand, M., Pierre, C., 2017, “Full Three-Dimensional Rotor/Stator Interaction Simulations in Aircraft Engines With Time-Dependent Angular Speed,” ÌęJournal of Engineering for Gas Turbines and Power, American Society of Mechanical Engineers, 139 (3).

Thorin, A., Delezoide, P., Legrand, M., 2017, “Periodic solutions of n-dof autonomous vibro-impact oscillators with onelasting contact phase,” Nonlinear Dynamics, Springer Verlag.

Conferences

Thorin, A., Legrand, M., 9th European Nonlinear Dynamics Conference, “Spectrum of an impact oscillator via nonsmooth modal analysis,” Budapest, Hungary, Jun 2017.

Venkatesh, J., Thorin, A., Legrand, M., ASME 2017 International Design Engineering Technical Conferences, “Nonlinear modal analysis of a one-dimensional bar undergoing unilateral contact via the time-domain boundary element method,” Cleveland, United States, Aug 2017.

Junca, S., Thi, H.L., Legrand, M., Thorin, A., ENOC 2017 - 9th European Nonlinear Dynamics Conference, “Impact dynamics near unilaterally constrained grazing orbits,” Budapest, Hungary, Jun 2017.

Yoong, C., ÌęAcary, V., Legrand, M., 9th European Nonlinear Dynamics Conference, “Modification of Moreau-Jean's Scheme for Energy Conservation in Inelastic Impact Dynamics,” Budapest, Hungary, Jun 2017.

GuĂ©rin, N., ÌęThouverez, F., ÌęGibert, C., Legrand, M., Almeida, P., ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, “Thermomechanical Component Mode Synthesis for blade casing interaction prediction,” Charlotte, United States, Jun 2017.

Ìę

LESSARD, L.

Journal Publications

Visweswaraiah, S., Ohlman, N., Lessard, L., Hubert, P., 2017, “Flow-control and Hybridization Strategies for Compression Moulded T-shaped Parts Fabricated with Randomly Oriented Strands”, Journal of Reinforced Plastics and Composites, Vol. 36, No. 18, May, pp. 1327-1342.

Visweswaraiah, S., Lessard, L., Hubert, P., 2017, “Interlaminar Shear Behaviour of Hybrid Fibre Architectures of Randomly Oriented Strands Combined with Laminate Groups,” Composite Structures, Vol. 176, pp. 823-832.

Shafqat A., Mirza, S., Lessard, L., 2017,“Durability Assessment of Hybrid FRP Composite Shell and its application to Prestressed Concrete Girders,” Construction and Building Materials, Vol.150, pp. 114-122.

Lopez-Cruz, P., Laliberte, J., Lessard, L., 2017, “Investigation of Bolted/Bonded Composite Joint Behaviour Using Design of Experiments”, Composite Structures, Vol. 170, June, pp. 192-201.

Selezneva, M., Roy, S., Meldrum, S., Lessard, L., Yousefpour, A., 2017, “Modelling of Mechanical Properties of Randomly Oriented Strand Thermoplastic Composites,” Journal of Composite Materials, Vol. 51, No. 6, pp. 831-845.

Conferences

Visweswaraiah, S., Lessard, L., Hubert, P., Beaulieu, P., 2017, CANCOM2017, 10th Canadian-International Composites Conference, “Effects of Hybridization of Laminates with Randomly Oriented Strands at Coupon and Part Levels,” Ottawa, Canada, July 17-20, 2017.

Romanov, V., Lessard, L., CANCOM2017, 10th Canadian-International Composites Conference, “Strength of Multi-Bolt Hybrid Bonded/Bolted Composite Joints: a Parametric Study on Geometric Parameters,” Ottawa, Canada, July 17-20, 2017.

Duraisamy, A., Lessard, L., CANCOM2017, 10th Canadian-International Composites Conference, “Understanding the Acoustic Behaviour of Natural Fiber Composites and the Effects of Temperature and Humidity,” Ottawa, Canada, July 17-20, 2017.

Abaeian, N., Blass, U., Scavone, G., Lessard, L., 2017 International Symposium on Musical Acoustics (ISMA), “Design and Manufacturing of a Nylon-String Guitar Soundboard from Composite Materials,” June 18-22, 2017.

Visweswaraiah, S., Lessard, L., Hubert, P., Beaulieu, P., CompTest 2017, 8th International Conference on Composites Testing and Model Identification, “Conditions for Notch Sensitivity in Hybrid Fibre Architectures of Randomly Oriented Strands Combined with Laminate Groups,” Leuven, Belgium, April 5-7, 2017.

Romanov, V., Bae, J., Lessard, L., CompTest 2017, 8th International Conference on Composites Testing and Model Identification, “Influence of Geometric Parameters on Multi-Bolt Hybrid Bonded/Bolted Composite Joint Static Behaviour,” Leuven, Belgium, April 5-7, 2017.

Ìę

LI, J.

Journal Publications

Li, J., Celiz, A., Yang, J., Yang, Q., Wamala, I., Whyte, W., ÌęVasilyev, N.V., ÌęVlassak, J. J., Suo, Z., Mooney, D.J., 2017, “Tough adhesives for diverse wet surfaces,” Science 357, 6349, 378-381.

Tang, J., Li, J., Vlassak, J.J., Suo, Z., 2017, “Fatigue fracture of hydrogels, Extreme Mechanics Letters,”Ìę 10, 24-31.

Ìę

MISRA, A.

Journal Publications

Jia, Y., Misra, A.K., 2017,“Robust trajectory tracking control of a dual-arm space robot actuated by control moment gyroscopes,” Acta Astronautica, Vol. 137, pp. 287 - 301.

Sharf, I., Thomsen, B., Botta, E.M., Misra, A.K., 2017, “Experiments and simulation of a net closing mechanism for tether-net capture of space debris,” Acta Astronautica, Vol. 139, pp. 332 - 343.

Qi, R., Misra, A.K., Zuo, Z., 2017,“Active debris removal using double-tethered space-tug system,” Journal of Guidance, Control, and Dynamics. Vol. 40, No. 3, pp. 772 - 730.

Ran, D., Chen, X. Misra, A.K., 2017, “Finite time coordinated formation control for spacecraft formation flying under directed communication topology,” Acta Astronautica, Vol. 136, pp. 125 - 136.

Botta, E.M., Sharf, I. Misra, A.K., 2017,“Energy and momentum analysis of the deployment dynamics of nets in space,” Acta Astronautica, Vol. 140, pp. 554 - 564.

Aslanov, V.S., Misra, A.K., and Yudintsev, V.V., 2017, “Chaotic attitude motion of a low-thrust tug-debris tethered system in a Keplerian orbit,” Acta Astronautica, Vol. 139, pp. 419 - 427.

Botta, E.M., Sharf, I. Misra, A.K., 2017, “Contact dynamics modeling and simulation of tether nets for space-debris capture,” ÌęJournal of Guidance, Control, and Dynamics, Vol. 40, No. 1, pp. 110 - 123. Ìę

Conferences

Misra, A.K., Seventh International Conference on Theoretical, Applied, Computational and Experimental Mechanic (ICTACEM 2017), “Removal of space debris,” IIT Kharagpur, India, 28-30 December 2017.Ìę

Jia, Y., Misra, A.K., iNaCoMM 2017, “Direct dynamics of a space robot actuated by control moment gyros,” Mumbai, India, 13 - 15 December 2017.

Misra, A.K., 4th IAA Conference on University Satellite Missions and CubeSat Workshop, Ìę“Tether-connected cubesats,” Rome, Italy, 4-7 December 2017.

Botta, E.M., Misra, A.K., Sharf, I., 1st IAA Conference on Space Situational Awareness, “Simulation of tether-nets for capture of space debris and small asteroids,” Orlando, FL, 13-15 November 2017.

Rajasekar , P., Misra, A.K., Pelletier, F., Gollu, N., 1st IAA Conference on Space Situational Awareness, “Optimization of space debris collision avoidance maneuver,” Orlando, FL, 13-15 November 2017.ÌęÌęÌę

Shi, A., Qi, R., Misra, A.K., Zhang, J., 68th International Astronautical Congress, “Coulomb tether double-pyramid satellite formations with application to GEO satellite collocation,” Adelaide, Australia, 25-29 September, 2017, Paper No. IAC-17-C1.1.1.

Misra, A.K., Saynak, R., Doss, A.P., 68th International Astronautical Congress, “Towing of space debris using a tether,” Adelaide, Australia, 25-29 September 2017, Paper No. IAC-17-D4.3.15.

Misra, A.K., Ìę3rd IAA Conference on Dynamics and Control of Space Systems (DyCoSS 2017), “Active space debris removal,” Moscow, Russian Federation, 30 May - 1 June 2017.

Jean, I., Misra, A.K. Ng, A. 3rd IAA Conference on Dynamics and Control of Space Systems (DyCoSS 2017), “Coupled Orbital and Attitude Dynamics around an Asteroid,” Moscow, Russian Federation, 30 May - 1 June 2017.

Botta, E.M., Sharf, I. Misra, A.K., 27th AAS/AIAA Space Flight Mechanics Meeting, “Tether-nets for active space debris removal: effect of the tether on deployment and capture dynamics,” San Antonio, Texas, 5-9 February 2017, Paper No. AAS-17-387.

Ìę

MONGEAU, L.

Journal Publications

Amiri, S., Taher, R., Mongeau, L., 2017, “Quantitative visualization of temperature field and measurement of local heat transfer coefficient over heat exchanger elements in sinusoidal oscillating flow,” Experimental Thermal and Fluid Science, Vol. 85, pp. 22-36.

AlReefi, M.A., Nguyen, L.H.P., Mongeau, L., Haq, B.U., Boyanapalli, S., Hafeez, N., Cegarra-Escolano, F., Tewfik, M.A., 2017, “Development and validation of a septoplasty training model using 3-dimensional printing technology,” International Forum of Allergy and Rhinology, Vol. 7, No. 4, pp. 399-404.

Alrasheed, A.S., Nguyen, L.H., Mongeau, L., Funnell, W.R.J., Tewfik, M.A., 2017, “Development and validation of a 3D-printed model of the ostiomeatal complex and frontal sinus for endoscopic sinus surgery training,” International Forum of Allergy and Rhinology, Vol. 7, No. 8, pp. 837-841.

Asgari, M., Latifi N., Heris, H. K., Vali, H., Mongeau, L., 2017, “In Vitro Fibrillogenesis of Tropocollagen type III in collagen type I affects its relative fibrillar topology and mechanics,” Scientific reports, Vol. 7, No. 1.

Seekhao, N., JaJa, J., Mongeau, L., and Li-Jessen, N.Y.K., 2017, “In Situ Visualization for 3D Agent-Based Vocal Fold Inflammation and Repair Simulation,” Supercomputing frontiers and innovations, Vol. 4, No.3, pp. 68ff.

Conferences

Kazarine, A., Bouhabel, S., Douilette, A.H., Kost, K., Li-Jessen, N.Y.K., Mongeau, L., Wiseman, P., Proc. SPIE10069, Multiphoton Microscopy in the Biomedical Sciences XVII, “Multimodal imaging of vocal fold scarring in a rabbit model by multiphoton microscopy,” 100692E, 2017. Doi: 10.1117/12.2250412.

Ìę

MONGRAIN, R.

Journal Publications

Pagiatakis, C., Tardif, J.C., L'Allier P.L., Mongrain, R., 2017, “Effect of stenosis eccentricity on the functionality of coronary bifurcation lesions-a numerical study,” Med Biol Eng Comput, 55(12): 2079-2095.

Mohammadi, H., Cartier, R., Mongrain, R., 2017, “3D physiological model of the aortic valve incorporating small coronary arteries,” International Journal for Numerical Methods in Biomedical Engineering, 33(5): doi:10.1002/ccnm.2829.

Mohammadi, H., Cartier, R., Mongrain, R., 2017, “The impact of the aortic valve impairment on the distant coronary arteries hemodynamics: a fluid-structure interaction study,” Med Biol Comput, 55(10):1859-1872.

Chung, J., Lachapelle, K., Mongrain, R., Cartier, R., Leask, R., 2017, “Loss of mechanical directional dependency of the ascending aorta with severe medial degeneration,” Cardiovasc Pathol, 26: 45–50.

Conferences

Mongrain, R., Frattolin, J., Bertrand, O.F.,Ìę CFCI 2017 XIXeme Congres Francophone de Cardiologie Interventionnelle, «ÌęLes stents mĂ©talliques rĂ©sorbables,Ìę» Paris, France 4-6 Oct, 2017.

Mongrain, R., 6th AimRADIAL2016 Congress, “Regulation of the coronary blood flow: primer for the interventional cardiologist,” ÌęStutugart, Germany, 20-22 Sept 2017.

Frattolin, J., Rajagopalan, S., Yue, S., Bertrand, O.F., Mongrain, R. CFCI 2017 XIXeme Congres Francophone de Cardiologie Interventionnelle, “Impact of annealing on the biomechanical performance of a novel biodegradable stent,” Paris, France 4-6 Oct, 2017.

He, Z., Mongrain, R., Lessard, S., Soulez, G., Proceedings of the IFBM, European medical and biological conference, “Extents, locations and geometrical configurations of calcification in abdominal aortic aneurysm,” 65: 639-64, 2017.

Mongrain, R., Chung, Y.H., Azar, T., Cecere, R., “M2D2017 7th International Conference on Mechanics and Materials in Design, Development of a New Hubless Ventricular Assist Device,” Albufeira, Portugal, 11-15 June 2017.

Hong, E., Mongrain, R. Chodavarapu, V., Li C.J., (MC13) 13th International Conference on Materials Chemistry, “A convegent strategy in the regioselective modification of a glycoconjugate with biologically active natural product-derived structures,” Liverpool, UK, 10-13 July, 2017.

Garcia J, Lachapelle K, Leask R, Mongrain, R., Simulation Summit, “Simulated aortic tissue using 3D printed multi-material composites (abstract 5060),” Nov 1-2, Montreal, 2017.

He, Z., Mongrain, R., Lessard, S., Soulez, G., 5th International Conference on Computational & Mathematical Biomedical Engineering (CMBE17), “Extents, locations and geometrical configurations of calcification in Abdominal Aortic Aneurysm,” University of Pittsburgh, Pittsburgh, PA, USA, April 10-12, 2017.

Mongrain, R., Chung, Y.H., Azar, T., Cecere, R., M2D2017 7th International Conference on Mechanics and Materials in Design, “Development of a new hubless ventricular assist device,” Albufeira, Portugal, June 2017

Ìę

MYDLARSKI, L.

Journal Publications

Mydlarski, L., 2017, “A turbulent quarter century of active grids: From Makita (1991) to the present,” Fluid Dynamics Research, Vol. 49(6), Art. no. 061401(20 pages).

Conferences

Hewes, A., Mydlarski, L., Sixteenth EUROMECH European Turbulence Conference, “Simultaneous measurement of two scalars and velocity in a coaxial jet,” Stockholm, Sweden, 21-24 August, 2017.

Akutina, Y., Mydlarski, L., Gaskin, S., Eiff, O., Fourth International Symposium on Shallow Flows, “Stereoscopic measurements through a free water surface,” Eindhoven, Netherlands, 26-28 Jun. 2017.

Akutina, Y., Mydlarski, L., Gaskin, S., Fourth International Symposium on Shallow Flows “Shallow flow past a cavity: effect on the exchange and the mechanism of the resonant response,” Eindhoven, Netherlands, 26-28 Jun. 2017.

Gaskin, S., PĂ©rez-Alvarado, A., Mydlarski, L., Fourth International Symposium on Shallow Flows, “Impact of relative turbulence scales on the effect of background turbulence on jet flows,” Eindhoven, Netherlands, 26-28 Jun. 2017.

Razavinia, N., Mydlarski, L., Canadian Engineering Education Association’s Annual Conference – CEEA2017, “Centralized outcome-based assessment process at Âé¶čAV,” Toronto, ON, 4-7 June, 2017.

Orjuela-Laverde, M., Razavinia, N., Mydlarski, L., Canadian Engineering Education Association’s Annual Conference – CEEA2017, “Enhancing lifelong learning awareness in the Faculty of Engineering at Âé¶čAV,” Toronto, ON, 4-7 June, 2017.

Ìę

NADARAJAH, S.

Journal Publications

Tardif, P.-O., Nadarajah, S., 2017, “Three-Dimensional Aeroelastic Solutions via the Nonlinear Frequency Domain Method”, AIAA Journal 55(10): 3553-3569(2017), DOI: 10.2514/1.J054849.

Brown, D., Nadarajah, S., 2017, “Inexactly-Constrained Discrete Adjoint Steepest-Descent Optimization Algorithms”, Journal of Numerical Algorithms, Springer. DOI 10.1007/s11075-017-0409-7.

Najafiyazdi, M., Mongeau, L., Nadarajah, S., 2017, “Low-Dissipation Low-Dispersion Explicit Taylor-Galerkin Schemes from Runge-Kutta Methods”, International Journal of Aeroacoustics.

Conferences

Shi-Dong, D., Nadarajah, S., AIAA Aviation Conference, “Approximate Hessian for Accelerated Convergence of Aerodynamic Shape Optimization Problems,”, Denver, CO, May, 2017.

Chen, C., Nadarajah, S., 2017, AIAA Aviation Conference, “A Hybrid GMRES Solver with Deflation for Ill-conditioned Adjoint Systems for Aerodynamic Shape Optimization,”, Denver, CO, May, 2017.

Shi-Dong, D., Chen, C., Nadarajah, S., AIAA Aviation Conference, “Adjoint-Based Aerodynamic Optimization of Benchmark CRM Wing,” Denver, CO, May, 2017.

Zwanenburg, P., Nadarajah, S., AIAA Aviation Conference, “On the Necessity of Superparametric Geometry Representation for Discontinuous Galerkin Methods on Domains with Curved Boundaries,” Denver, CO, May 2017.

Ringue, N., Nadarajah, S., AIAA Aviation Conference, “Optimization-based Anisotropic hp-Adaptation for High-Order Methods,” Denver, CO, May, 2017.

Navah, F., Nadarajah, S., AIAA Aviation Conference, "Motivations and methods of verification for high-order RANS solvers,” Denver, CO, May, 2017.

Ìę

NAHON, M.

Conferences

Bulka, E., Nahon, M., International Conference on Unmanned Aircraft Systems (ICUAS’17), “Autonomous Control of Agile Fixed-Wing UAVs Performing Aerobatic Maneuvers,” Miami, FL, June 13-16, 2017.

Levin, J., Paranjape, A., Nahon, M., International Conference on Unmanned Aircraft Systems (ICUAS’17), “Agile Fixed-Wing UAV Motion Planning with Knife-Edge Maneuvers,” Miami, FL, June 13-16, 2017.

A. Battiston, I. Sharf, Nahon, M., International Conference on Unmanned Aircraft Systems (ICUAS’17), “Attitude Estimation for Normal Flight and Collision Recovery of a Quadrotor UAV,” Miami, FL, June 13-16, 2017.

Ìę

Nedić, J.

Journal Publications

Tavoularis, S., Nedić, J., 2017, “Taylorian diffusion in mildly inhomogeneous turbulence,” International Journal of Heat and Fluid Flow 67, 116-121.

Nedić, J., Tavoularis, S., Marusic, I., 2017, “Dissipation scaling in constant-pressure turbulent boundary layers,” Physical Review Fluids 2 (3), 032601.

Conferences

Nedić, J., Tavoularis, S., Conference proceedings of the10th International Symposium on Turbulence and Shear Flow Phenomena, “A case study of multistructure turbulence: uniformly sheared flow distorted by a grid,” Volume 2, Chicago, IL, USA, 6-9th July 2017.

Ìę

PASINI, D.

Journal Publications

Melancon, D., Bagheri, Z.S., Johnston, R.B., Liu, L., Tanzer, M., Pasini, D., 2017, “Mechanical characterization of structurally porous biomaterials built via additive manufacturing: experiments, predictive models, and design maps for load-bearing bone replacement implants,” Acta Biomaterialia, Vol. 63, pp. 350-368.

Liu, L., Kamm, P., García-Moreno, F., Banhart, J., Pasini, D., 2017, “Elastic and failure response of imperfect three-dimensional metallic lattices: the role of geometric defects induced by Selective Laser Melting,” Journal of the Mechanics and Physics of Solids, Vol 107, pp. 160-184.

Rofouie, P., ÌęPasini, D., Rey, A., 2017, “Morphology of closed nematic liquid crystal membranes,” Soft Matter, Vol 13, pp. 5366-5380.

Xu, H., Farag, A., Pasini, D., 2017, “Multilevel hierarchy in bi-material lattices with high specific stiffness and unbounded thermal expansion,” Acta Materialia, Vol 134, pp. 155 – 166.

An, H., Singh, J., Pasini D., 2017, “Structural efficiency metrics for integrated selection of layup, material, and cross-section shape in laminated composite structures,” Composite Structures, Vol. 170, pp. 53–68.

Rofouieeraghi, P., Pasini D., Rey, A., 2017, “Multiple-Wavelength Surface Patterns in Models of Biological Chiral Liquid Crystal Membranes,” Soft Matter, Vol. 13(3), pp. 541-545.

Faisal, T.R., Hristozov, N., Rey, A., Western, T., Pasini, D., 2017, “The twist-to-bend compliance of the Rheum Rhabarbarum petiole: integrated computations and experiments,” Journal of Computer Methods in Biomechanics and Biomedical Engineering, Vol. 20(4), pp. 343-354.

Khanoki, S.A., Johnston, R.B., Tanzer, M., Pasini, D., 2017, “Fully porous 3D printed titanium femoral stem to reduce stress-shielding following total hip arthroplasty,” Journal of Orthopaedic Research, Vol 35 (8), 1774–1783.

Wang, Y., Xu, H., Pasini, D., 2017, “Multiscale isogeometric topology optimization for lattice materials,” Computer Methods in Applied Mechanics and Engineering – Special Issue on Isogeometric Analysis, Vol. 316, pp. 568-585.

Shang X., Liu L., Rafsanjani A., Pasini D., 2017, “Durable Bistable Auxetics Made of Rigid Solids,” Journal of Materials Research – Focus Issue: Architected Materials, pp. 1-9.

Book Chapters

Pasini, D., Arabnejad, S., “Elastostatics of lattice materials,” in Dynamics of Lattice Materials and Structures, Editors: Phani, A. S. and Hussein, M. I., John Wiley and Sons, pp. 19-51, 2017.

Vigliotti, A., Pasini, D., “The design of skin panels for morphing wings in lattice materials,” in MORPHING WINGS TECHNOLOGIES: LARGE COMMERCIAL AIRCRAFT AND CIVIL HELICOPTERS, Editors: Antonio Concilio Ignazio Dimino Leonardo Lecce Rosario Pecora, Elsevier Science & Technology, 2017.

Conferences

Moussa, A., Tanzer, M., Pasini, D., 12th World Congress of Structural and Multidisciplinary Optimisation, “Topology optimization of a cervical fusion cage with graded porous Titanium,” Braunschweig, Germany, 5 - 9 June, 2017.

Ìę

SHARF, I.

Journal Publications

Botta, E.M., Sharf, I., Misra, A.K., 2017, “Energy and Momentum Analysis of the Deployment Dynamics of Nets in Space,” Acta Astronautica, Vol. 140, pp. 554-564.

Sharf, I., Thomsen, B., Botta, E.M., Misra, A.K., 2017, “Experiments and Simulation of a Net Closing Mechanism for Tether-net Capture of Space Debris,” Acta Astronautica, Vol. 139, pp. 332-343.

Sagniùres, L.B.M., Sharf, I., 2017, “Stochastic modeling of hypervelocity impacts in attitude propagation of space debris,” Advances in Space Research, Vol. 59, pp. 1128-1143.

St-Onge, D., Breches, P.-Y., Sharf, I., Reeves, N., Rekleitis, I., Abouzakhm, P., Girdhar, Y., Harmat, A., Dudek, G., Giguere, P., 2017, “Control, Localization and Human Interaction with an Autonomous Lighter-than-air Performer,” ÌęRobotics and Autonomous Systems, Vol. 88, pp. 165-186.Ìę

Botta, E.M., Sharf, I., Misra, A.K., 2017, “Contact Dynamics Modeling and Simulation of Tether Nets for Space-Debris Capture,” AIAA Journal of Guidance, Control, and Dynamics, Vol. 40, No. 1, pp. 110-123.

Conferences

Botta, E.M., Sharf, I., Misra, A.K., 1st IAA Conference on Space Situational Awareness (ICSSA), “Simulation of Tether-Nets for Capture of Space Debris and Small Asteroids,” Orlando, FL, November 2017.

Battiston, A.,Ìę Sharf, I., Nahon, M., 2017International Conference on Unmanned Aircraft Systems, ICUAS, “Attitude estimation for normal flight and collision recovery of a quadrotor UAV,” pp. 840-849,Ìę Miami, US, June 13-16,Ìę 2017.

Dicker, G., Chui, F., Sharf, I., IEEE International Conference on Robotics and Automation, ICRA2017, “Quadrotor Collision Characterization and Recovery Control,” Singapore, May 29-June 3, 2017.

Ìę

TIMOFEEV, E.

Journal Publications

Mi, X., Timofeev, E.V., Higgins, A., 2017, “Effect of spatial discretization of energy on detonation wave propagation,” ÌęJ. of Fluid Mechanics, Vol. 817, pp. 306-338.

Moradian, N., Timofeev, E., 2017, “Starting characteristics of Prandtl-Meyer scramjet intakes with overboard spillage,” ÌęJ. of Propulsion and Power, Online publication August 11.

Modarreszadeh, S., Timofeev, E., Merlen, A., Bou Matar, O., Pernod, P., 2017, “Numerical simulation of magneto-acoustic wave phase conjugation with the DG method in the CPR framework,” AIP (American Institute of Physics) Proceedings 1863, 030002/1-4.

Moradian, N., Timofeev, E., Tahir, R., 2017, “Theoretical analysis of self-starting Busemann intake family,” International Journal of Mechanical and Mechatronics Engineering,Ìę Vol. 11, No. 5, pp. 926-935.

Conferences

Kleine, H., Alzamori Previtali, F., Timofeev, E., “The influence of concave wedge tips on shock reflection patterns,” In: Ben-Dor, G., Sadot, O., Igra, O. (eds.) 30th International Symposium on Shock Waves, Vol. 1, pp. 641-646, Springer (2017)

Alzamora Previtali, F., Timofeev, E., Kleine, H., Proceedings of the 31st International Symposium on Shock Waves, “On InMR-TRR transition on a concave cylindrical reflector,” Nagoya, Japan, July 9-14, 2017.

Shoesmith, B., Timofeev, E., Proceedings of the 31st International Symposium on Shock Waves, “On hysteresis at axisymmetric curved shock reflection from an axial cylinder,” Nagoya, Japan, July 9-14, 2017.

Ìę

VENGALLATORE, S.

Journal Publications

Shalabi, N., Cornachione, A., Leite, F., Vengallatore, S., Rassier, D. E., 2017, “Residual force enhancement is regulated by titin in skeletal and cardiac myofibrils,” Journal of Physiology, vol. 595, pp. 2085-2098.

Shalabi, N., Persson, M., ÌęMĂ„nsson, A., Vengallatore, S., Rassier, D.E., 2017, “Sarcomere stiffness during stretching and shortening of rigor skeletal myofibrils,” Biophysical Journal, vol. 113, pp. 2768-2776.

Ìę

ZHAO, Y.F.

Journal Publications

Dong, G., Wijaya, G., Tang, Y., Zhao, Y.F., 2017, “Optimization Process Parameters of Fused Deposition Modeling by Taguchi Method for the Fabrication of Lattice Structure”, Additive Manufacturing Journal, accepted, October.

Yang, S., Zhao, Y.F., 2017,“Additive manufacturing-enabled part count reduction: a lifecycle perspective”, Journal of Mechanical Design, December.

Yang, S., Santoro, F., ÌęZhao, Y.F., 2017,“Towards a numerical approach of finding candidates for additive manufacturing-enabled part consolidation”, Journal of Mechanical Design, December.

Zhibo Luo, Zhao, Y.F., 2017, “A survey of finite element analysis of temperature and thermal stress fields in powder bed fusion Additive Manufacturing”, Additive Manufacturing Journal, June.

Tang, Y., Zhao, Y.F., 2017, “Multifunctional Design of Heterogeneous Cellular Structures for Additive Manufacturing,” Structural and Multidisciplinary Optimization, July.

Dong, G., Tang, Y., Zhao, Y.F., 2017, “A Survey of Modeling of Lattice Structures Fabricated by Additive Manufacturing,” Journal of Mechanical Design, Special Issue on Design for Additive Manufacturing, Vol. 139, pp. 1-17.

Tang, Y., Dong, G., ÌęZhou, Q., Zhao, Y.F., 2017, “Lattice Structure Design and Optimization with Additive Manufacturing Constraints,” IEEE Transactions on Automation Science and Engineering Special Issue on Advances of Automation for Additive Manufacturing, Issue 99, pp. 1-17.

Ìę

Back to top