Â鶹AV

important

Note: This is the 2022–2023 eCalendar. Update the year in your browser's URL bar for the most recent version of this page, or .

Biomanufacturing (45 credits)

Offered by: Biological & Biomedical Engr     Degree: Master of Engineering

Program Requirements

The M.Eng. in Biological and Biomedical Engineering; Non-Thesis - Biomanufacturing focuses on the life sciences, the physical sciences, and engineering, industrial practices and processes, and data science for application in the filed of biomanufacturing. Hands-on experience available through projects carried out during internships in academic, industrial, and governmental laboratories.

Required Courses (21 credits)

  • BBME 600D1 Seminars in Biological and Biomedical Engineering (1.5 credits) **

    Offered by: Biological & Biomedical Engr (Interfaculty Studies)

    Administered by: Graduate Studies

    Overview

    BBME : Mandatory attendance at the seminar series at which students present a seminar related to their research

    Terms: Fall 2022

    Instructors: Rudko, David; Mahshid, Sara (Fall)

    • Restriction(s): Only open to students registered in the second term or later of the M.Eng. in Biological and Biomedical Engineering (Thesis). Not open to students who have taken BMDE 600D1/2.

    • 1. Students must register for both BBME 600D1 and BBME 600D2

    • 2. Students must register for BBME 600D1 before registering for BBME 600D2

    • 3. No credit will be given for this course unless both BBME 600D1 and BBME 600D2 are successfully completed in consecutive terms

  • BBME 600D2 Seminars in Biological and Biomedical Engineering (1.5 credits) **

    Offered by: Biological & Biomedical Engr (Interfaculty Studies)

    Administered by: Graduate Studies

    Overview

    BBME : Mandatory attendance at the seminar series at which students present a seminar related to their research.

    Terms: Winter 2023

    Instructors: Rudko, David; Reznikov, Natalie (Winter)

    • Restriction(s): Only open to students registered in the second term or later of the M.Eng. in Biological and Biomedical Engineering (Thesis). Not open to students who have taken BMDE 600D1/2.

    • 1. Students must register for both BBME 600D1 and BBME 600D2

    • 2. Students must register for BBME 600D1 before registering for BBME 600D2

    • 3. No credit will be given for this course unless both BBME 600D1 and BBME 600D2 are successfully completed in consecutive terms

  • BBME 600N1 Seminars in Biological and Biomedical Engineering (1.5 credits) **

    Offered by: Biological & Biomedical Engr (Interfaculty Studies)

    Administered by: Graduate Studies

    Overview

    BBME : Mandatory attendance at the seminar series at which students present a seminar related to their research

    Terms: Winter 2023

    Instructors: Rudko, David; Reznikov, Natalie (Winter)

    • Students must also register for BBME 600N2

    • No credit will be given for this course unless both BBME 600N1 and BBME 600N2 are successfully completed in a twelve month period.

  • BBME 600N2 Seminars in Biological and Biomedical Engineering (1.5 credits) **

    Offered by: Biological & Biomedical Engr (Interfaculty Studies)

    Administered by: Graduate Studies

    Overview

    BBME : Mandatory attendance at the seminar series at which students present a seminar related to their research.

    Terms: Fall 2022

    Instructors: Rudko, David; Mahshid, Sara (Fall)

    • Prerequisite: BBME 600N1

    • No credit will be given for this course unless both BBME 600N1 and BBME 600N2 are successfully completed in a twelve month period.

  • BBME 681 Internship 1 (9 credits) *

    Offered by: Biological & Biomedical Engr (Interfaculty Studies)

    Administered by: Graduate Studies

    Overview

    BBME : An internship/research project (minimum 360 hours) related to the practice of Biological and Biomedical Engineering supervised by a practitioner in the biological and biomedical engineering field within an industrial or institutional research centre environment.

    Terms: Summer 2023

    Instructors: Ignea, Codruta; Jardon, Mario; Hoesli, Corinne; Sudalaiyadum Perumal, Ayyappasamy; Chen, Guojun (Summer)

    • Restriction: Only open to students registered in the M.Eng. in Biological and Biomedical Engineering; Non-Thesis program.

    • Students will be supervised by a BBME faculty member and co-supervised by a qualified supervisor from the host organization.

  • BBME 682 Internship 2 (9 credits) *

    Offered by: Biological & Biomedical Engr (Interfaculty Studies)

    Administered by: Graduate Studies

    Overview

    BBME : An internship/research project (minimum 360 hours) related to the practice of Biological and Biomedical Engineering supervised by a practitioner in the biological and biomedical engineering field within an industrial or institutional research centre environment.

    Terms: This course is not scheduled for the 2022-2023 academic year.

    Instructors: There are no professors associated with this course for the 2022-2023 academic year.

    • Restrictions: Only open to students registered in the M.Eng. in Biological and Biomedical Engineering; Non-Thesis program.

    • This course may be completed in the same organization and under the same supervisor as BBME 681 to consolidate professional knowledge and experience, or in another institution to broaden professional experience and knowledge.

    • Students will be supervised by a BBME faculty member and co-supervised by a qualified supervisor from the host organization.

* must take place in the Biomanufacturing sector
** Students take either BBME 600D1 and BBME 600D2 or BBME 600N1 and BBME 600N2.

Complementary Courses (24 credits)

Minimum of 18 credits from the following three lists of core courses. At least 12 credits must be chosen from biomanufacturing core courses. At least 12 credits must be chosen from BBME core courses, of which at least 6 credits must be chosen from quantitative courses.

Biomanufacturing Core:

  • BIEN 500 Special Topics in Bioengineering 1 (3 credits)

    Offered by: Bioengineering (Faculty of Engineering)

    Overview

    BIEN : Selected special topics in bioengineering, given by current and visiting staff.

    Terms: Fall 2022, Winter 2023

    Instructors: Jardon, Mario; Kamen, Amine; Sudalaiyadum Perumal, Ayyappasamy (Fall) Kozlick, Stuart (Winter)

    • Prerequisite: Permission of instructor

    • Restriction: Open to U4 or higher students.

    • (3-0-6)

  • BIEN 580 Synthetic Biology (3 credits)

    Offered by: Bioengineering (Faculty of Engineering)

    Overview

    BIEN : Engineering principles in biology, BioBricks and standardization of biological components, parts registries, advanced molecular biology tools for DNA assembly, genome editing, high-throughput genetic manipulation methods, construction of biological pathways, strategies for transcriptional control, examples of engineered systems.

    Terms: Winter 2023

    Instructors: Ignea, Codruta (Winter)

    • Restriction: Permission of instructor

    • 1. (3-2-4)

  • BIEN 585 Metabolic Engineering (3 credits)

    Offered by: Bioengineering (Faculty of Engineering)

    Overview

    BIEN : Metabolic engineering role in transition from fossil resources to a bio-based society. Design-build-test-learn cycle of metabolic engineering. Design, genetic engineering and optimization of microbial biocatalysts. Metabolic network analysis, constraint-based modelling of metabolism, microbial production of valuable chemicals. General biochemical engineering practices. Recombinant DNA technology, enzyme function, kinetics and regulation. Cell chemistry, structure and function. Growth models, fermentation, strain development. Case studies.

    Terms: Fall 2022

    Instructors: Ignea, Codruta (Fall)

    • 3-2-4

    • Prerequisite: Permission of the instructor.

  • BIEN 590 Cell Culture Engineering (3 credits)

    Offered by: Bioengineering (Faculty of Engineering)

    Overview

    BIEN : Basic principles of cell culture engineering, cell line development and cell culture products; genomics, proteomics and post-translational modifications; elements of cell physiology for medium design and bioprocessing; bioreactor design, scale-up for animal cell culture and single use equipment; challenges in downstream processing of cell-culture derived products; process intensification: fed-batch, feeding strategies and continuous manufacturing; scale-down and process modeling; Process Analytical technologies and Quality by Design (QbD) concept.

    Terms: Fall 2022, Winter 2023

    Instructors: Sudalaiyadum Perumal, Ayyappasamy; Kamen, Amine (Fall) Sudalaiyadum Perumal, Ayyappasamy; Kamen, Amine (Winter)

    • (3-0-6)

    • Prerequisite: Permission of instructor.

  • BIEN 670 Downstream Processing (3 credits)

    Offered by: Bioengineering (Faculty of Engineering)

    Administered by: Graduate Studies

    Overview

    BIEN : Introduction to downstream processing (DSP) – principles, characteristics, purpose. Bioprocesses, biomolecules, drug substances, drug products, monoclonal antibodies and Fc fusion proteins, viral vectors, and vaccines. Unit operations - standard practices. Steps and techniques in downstream processing. Harvest and Filtration, Primary capture, Buffer exchange and up-concentration, Purification, Bioconjugation, Formulation. Optimization of downstream processing. Process Analytical Technology (PAT) to support Quality by Design (QbD) in DSP. Regulatory guidelines. Innovative Techniques for Downstream Bioprocessing.

    Terms: Winter 2023

    Instructors: Ignea, Codruta (Winter)

    • Prerequisites: BIEN 590 or permission of the instructor

  • BIEN 675 Process Analytical Technologies and Data Sciences (3 credits)

    Offered by: Bioengineering (Faculty of Engineering)

    Administered by: Graduate Studies

    Overview

    BIEN : Introduction to Process Analytical Technologies (PAT) and Quality by Design (QbD) in the area of manufacturing biologics. Critical Process Parameters (CPP) and Design Space. Analytical Technologies for Biologics and Biologic Medicines and determination of Critical Quality Attributes of products. Case studies. At-line, On-line and Off-line monitoring tools, data acquisition and advanced process control strategies as applied to current industrial biomanufacturing. PAT data processing and modeling to design advanced biomanufacturing processes.

    Terms: Winter 2023

    Instructors: Jardon, Mario; Kamen, Amine; Haldavnekar, Rupa (Winter)

    • Prerequisites: BIEN 590 or permission of the instructor.

  • BIEN 680 Bioprocessing of Vaccines (4 credits)

    Offered by: Bioengineering (Faculty of Engineering)

    Administered by: Graduate Studies

    Overview

    BIEN : Building on recent developments and expansion in the mammalian cell culture for production of complex biologics such as viral vaccines and viral vectors, the following topics will be covered: Principles of immunology and industrial virology; Cell physiology for vaccine production; Cell lines for vaccine production; Upstream process development and process intensification strategies; Purification and downstream processing of viral vaccines; Analytical and potency assays; Formulations and delivery of vaccines; Basics of clinical trials and regulatory principles; Immunization policies. Case studies on bioprocessing/manufacturing licensed vaccines.

    Terms: Winter 2023

    Instructors: Kamen, Amine (Winter)

    • Prerequisite: Permission of Instructor.

  • BIEN 685 Gene and Cell Therapy Viral Vectors Biomanufacturing (3 credits)

    Offered by: Bioengineering (Faculty of Engineering)

    Administered by: Graduate Studies

    Overview

    BIEN : Basic knowledge in the design and biomanufacturing of viral vectors for gene and cell therapy interventions. Practical examples and case studies highlighting challenges and solutions associated with use of viral vectors such as Adeno-Associated Vectors (AAV), lentivirus vectors and Adenovirus vectors for gene delivery. Fundamental principles of gene and cell therapies through in-vivo and ex-vivo interventions. Design of AAV, Lentivirus and Adenovirus vectors: example of targeted diseases, including CAR-T cell therapy. Technologies and modes of vector manufacturing for clinical use.

    Terms: Fall 2022

    Instructors: Kamen, Amine (Fall)

    • Prerequisites: BIEN 590 or permission of the instructor

    • Restrictions: Not open to students who have taken or are taking BIEN 680

  • BMDE 505 Cell and Tissue Engineering (3 credits)

    Offered by: Biomedical Engineering (Faculty of Engineering)

    Overview

    Biomedical Engineering : Application of the principles of engineering, physical, and biological sciences to modify and create cells and tissues for therapeutic applications will be discussed, as well as the industrial perspective and related ethical issues.

    Terms: Winter 2023

    Instructors: Prakash, Satya (Winter)

    • (3-0-6)

    • 1.5 hours lecture/1.5 hours seminar per week

    • Restriction: graduate and final year undergraduate students from physical, biological, and medical science, and engineering.

  • CHEE 512 Stem Cell Bioprocess Engineering (3 credits)

    Offered by: Chemical Engineering (Faculty of Engineering)

    Overview

    Chemical Engineering : Introduction to stem cell biology. Cell growth models applicable to stem cells and their progeny. Upstream processing (cell culture systems, bioreactors), downstream processing (cell separation, purification) and quality management (current good manufacturing practice, regulations) applied to therapeutic cells.

    Terms: This course is not scheduled for the 2022-2023 academic year.

    Instructors: There are no professors associated with this course for the 2022-2023 academic year.

    • (3-0-6)

    • Prerequisite(s): MATH 262 and CHEE 370 or BIOL 200, or Permission of Instructor.

    • Restriction: Open to undergraduate and graduate students registered in Chemical Engineering, as well as graduate students registered in the Â鶹AV Graduate Certificate in Regenerative Medicine program or in the M.Eng. in Biological and Biomedical Engineering program.

  • CHEE 651 Advanced Biochemical Engineering (4 credits)

    Offered by: Chemical Engineering (Faculty of Engineering)

    Administered by: Graduate Studies

    Overview

    Chemical Engineering : The use of chemical engineering and biological principles in the study, design, use and creation of biologically-based processes and products. Topics: biochemical thermodynamics, protein engineering, manipulation of gene expression, transport phenomena and bioreactor design.

    Terms: This course is not scheduled for the 2022-2023 academic year.

    Instructors: There are no professors associated with this course for the 2022-2023 academic year.

    • Restriction: Restricted to graduate students

BBME Courses (Quantitative):

  • BIEN 510 Engineered Nanomaterials for Biomedical Applications (3 credits)

    Offered by: Bioengineering (Faculty of Engineering)

    Overview

    BIEN : Introduction to the interdisciplinary field of biomedical uses of nanotechnology. Emphasis on emerging nanotechnologies and biomedical applications including nanomaterials, nanoengineering, nanotechnology-based drug delivery systems, nano-based imaging and diagnostic systems, nanotoxicology and immunology, and translating nanomedicine into clinical investigation.

    Terms: Fall 2022

    Instructors: Kinsella, Matt (Fall)

  • BIEN 530 Imaging and Bioanalytical Instrumentation (3 credits)

    Offered by: Bioengineering (Faculty of Engineering)

    Overview

    BIEN : Microscopy techniques with application to biology and medicine. Practical introduction to optics and microscopy from the standpoint of biomedical research. Discussion of recent literature; hands-on experience. Topics include: optics, contrast techniques, advanced microscopy, and image analysis.

    Terms: Winter 2023

    Instructors: Hendricks, Adam (Winter)

    • Prerequisite: Permission of instructor.

    • (3-1-5)

  • BIEN 550 Biomolecular Devices (3 credits)

    Offered by: Bioengineering (Faculty of Engineering)

    Overview

    BIEN : Fundamentals of motor proteins in neuronal transport, force generation e.g. in muscles, cell motility and division. A survey of recent advances in using motor proteins to power nano fabricated devices. Principles of design and operation; hands-on-experience in building a simple device.

    Terms: Fall 2022

    Instructors: Hendricks, Adam (Fall)

    • Prerequisite: Permission of instructor.

    • (3-1-5)

  • BIEN 560 Design of Biosensors (3 credits)

    Offered by: Bioengineering (Faculty of Engineering)

    Overview

    BIEN : Introduction into the motivation of analytical biosensors as well as its fundamental physicochemical challenges. Techniques used to design, fabricate and operate biosensors. Specific applications.

    Terms: Fall 2022

    Instructors: Wachsmann Hogiu, Sebastian; Nicolau, Dan (Fall)

    • Prerequisite(s): Permission of instructor.

    • 1. (3-2-4)

  • BIEN 570 Active Mechanics in Biology (3 credits)

    Offered by: Bioengineering (Faculty of Engineering)

    Overview

    BIEN : Introduction to the role of active forces, e.g. cell and tissue contraction, in the mechanics of biological systems. Review of passive and actively driven viscoelastic systems and momentum transport underlying the material properties of biology. The course involves a literature survey and a team project application.

    Terms: Fall 2022

    Instructors: Ehrlicher, Allen (Fall)

    • Prerequisite(s): Permission of instructor.

    • 1. (3-2-4)

  • BIEN 590 Cell Culture Engineering (3 credits)

    Offered by: Bioengineering (Faculty of Engineering)

    Overview

    BIEN : Basic principles of cell culture engineering, cell line development and cell culture products; genomics, proteomics and post-translational modifications; elements of cell physiology for medium design and bioprocessing; bioreactor design, scale-up for animal cell culture and single use equipment; challenges in downstream processing of cell-culture derived products; process intensification: fed-batch, feeding strategies and continuous manufacturing; scale-down and process modeling; Process Analytical technologies and Quality by Design (QbD) concept.

    Terms: Fall 2022, Winter 2023

    Instructors: Sudalaiyadum Perumal, Ayyappasamy; Kamen, Amine (Fall) Sudalaiyadum Perumal, Ayyappasamy; Kamen, Amine (Winter)

    • (3-0-6)

    • Prerequisite: Permission of instructor.

  • BMDE 502 BME Modelling and Identification (3 credits)

    Offered by: Biomedical Engineering (Faculty of Engineering)

    Overview

    Biomedical Engineering : Methodologies in systems or distributed multidimensional processes. System themes include parametric vs. non-parametric system representations; linear/non-linear; noise, transients and time variation; mapping from continuous to discrete models; and relevant identification approaches in continuous and discrete time formulations.

    Terms: Winter 2023

    Instructors: Haidar, Ahmad; Kearney, Robert E (Winter)

    • (3-0-6)

    • Prerequisites: Undergraduate basic statistics and: either BMDE 519, or Signals and Systems (e.g., ECSE 303 & ECSE 304) or equivalent

  • BMDE 503 Biomedical Instrumentation (3 credits)

    Offered by: Biomedical Engineering (Faculty of Engineering)

    Overview

    Biomedical Engineering : The principles and practice of making biological measurements in the laboratory, including theory of linear systems, data sampling, computer interfaces and electronic circuit design.

    Terms: Fall 2022

    Instructors: Wagner, Ross (Fall)

    • (3-0-6)

    • Prerequisite: Experience with differential equations, in particular Laplace Transforms and complex numbers (e.g. MATH 263 or MATH 381 or equivalent) or permission of instructor.

  • BMDE 512 Finite-Element Modelling in Biomedical Engineering (3 credits)

    Offered by: Biomedical Engineering (Faculty of Engineering)

    Overview

    Biomedical Engineering : General principles of quantitative modelling; types of models; principles of the finite-element method, primarily as applied to mechanical systems; introduction to the use of finite-element software; model generation from imaging data; modelling various material types, mainly biological; model validation.

    Terms: Fall 2022

    Instructors: Funnell, Robert (Fall)

    • (3-0-6)

    • Prerequisite: Differential equations (MATH 271 or equivalent) or permission of instructor

  • BMDE 519 Biomedical Signals and Systems (3 credits)

    Offered by: Biomedical Engineering (Faculty of Engineering)

    Overview

    Biomedical Engineering : An introduction to the theoretical framework, experimental techniques and analysis procedures available for the quantitative analysis of physiological systems and signals. Lectures plus laboratory work using the Biomedical Engineering computer system. Topics include: amplitude and frequency structure of signals, filtering, sampling, correlation functions, time and frequency-domain descriptions of systems.

    Terms: Fall 2022

    Instructors: Kearney, Robert E (Fall)

    • (3-0-6)

    • Prerequisites: Satisfactory standing in U3 Honours Physiology; or U3 Major in Physics-Physiology; or U3 Major Physiology-Mathematics; or permission of instructor

  • BMDE 520 Machine Learning for Biomedical Data (3 credits)

    Offered by: Biomedical Engineering (Faculty of Engineering)

    Overview

    Biomedical Engineering : Theoretical and practical course in machine learning applied to the expanding richness of biomedical data, including multidimensional biomedical measurements centring on high-resolution body imaging and whole-genome common variant genetics.

    Terms: Fall 2022

    Instructors: Bzdok, Danilo (Fall)

    • Prerequisite: MATH 203, MATH 223, MATH 323, and one course in computer programming (or equivalent background with permission of instructor).

    • Additional background in Calculus and Probability is recommended, e.g. MATH 222 and MATH 204, but not required.

  • BMDE 610 Functional Neuroimaging Fusion (3 credits)

    Offered by: Biomedical Engineering (Faculty of Medicine and Health Sciences)

    Administered by: Graduate Studies

    Overview

    Biomedical Engineering : Biomedical engineering: Multimodal data fusion of electrophysiology and functional neuroimaging data, including: detailed description of source localization methods for Electro- and MagnetoEncephaloGraphy data, analysis of brain hemodynamic activity through simultaneous recordings with electrophysiology, analysis and reconstruction of Near Infra-Red Spectroscopy data, modeling of the neurovascular coupling,validation methodology.

    Terms: Winter 2023

    Instructors: Grova, Christophe (Winter)

BBME Core (Non-Quantitative):

  • BIEN 535 Electron Microscopy and 3D Imaging for Biological Materials (3 credits)

    Offered by: Bioengineering (Faculty of Engineering)

    Overview

    BIEN : Introduction to electron microscopy and 3D imaging. Dual-beam microscopy (FIB-SEM, or focused ion beam – scanning electron microscope); conventional and cryogenic preparation methods for biological materials. Complementary methods such as X-ray diffraction, X-ray tomography, atom probe tomography. 3D image processing and analysis, and the fundamentals of deep learning in imaging.

    Terms: Winter 2023

    Instructors: Reznikov, Natalie (Winter)

    • 3-3-3

    • Prerequisite: Permission of the instructor.

    • Restrictions: Open to undergraduate (U3 or higher) and graduate students. Priority is given to bioengineering U3 undergraduate students.

  • BIEN 540 Information Storage and Processing in Biological Systems (3 credits)

    Offered by: Bioengineering (Faculty of Engineering)

    Overview

    BIEN : Storage and processing of information in biological systems, both natural and artificially-created, ranging from biomolecules, cells, and populations of cells. Information storage in DNA and DNA computation; molecular surfaces of proteins; computation with motile biological agents in networks; and biological and biologically-inspired algorithms.

    Terms: Winter 2023

    Instructors: Nicolau, Dan (Winter)

    • (3-2-4)

  • BIEN 580 Synthetic Biology (3 credits)

    Offered by: Bioengineering (Faculty of Engineering)

    Overview

    BIEN : Engineering principles in biology, BioBricks and standardization of biological components, parts registries, advanced molecular biology tools for DNA assembly, genome editing, high-throughput genetic manipulation methods, construction of biological pathways, strategies for transcriptional control, examples of engineered systems.

    Terms: Winter 2023

    Instructors: Ignea, Codruta (Winter)

    • Restriction: Permission of instructor

    • 1. (3-2-4)

  • BIEN 680 Bioprocessing of Vaccines (4 credits)

    Offered by: Bioengineering (Faculty of Engineering)

    Administered by: Graduate Studies

    Overview

    BIEN : Building on recent developments and expansion in the mammalian cell culture for production of complex biologics such as viral vaccines and viral vectors, the following topics will be covered: Principles of immunology and industrial virology; Cell physiology for vaccine production; Cell lines for vaccine production; Upstream process development and process intensification strategies; Purification and downstream processing of viral vaccines; Analytical and potency assays; Formulations and delivery of vaccines; Basics of clinical trials and regulatory principles; Immunization policies. Case studies on bioprocessing/manufacturing licensed vaccines.

    Terms: Winter 2023

    Instructors: Kamen, Amine (Winter)

    • Prerequisite: Permission of Instructor.

  • BMDE 501 Selected Topics in Biomedical Engineering (3 credits)

    Offered by: Biomedical Engineering (Faculty of Engineering)

    Overview

    Biomedical Engineering : An overview of how techniques from engineering and the physical sciences are applied to the study of selected physiological systems and biological signals. Using specific biological examples, systems will be studied using: signal or finite-element analysis, system and identification, modelling and simulation, computer control of experiments and data acquisition.

    Terms: Fall 2022

    Instructors: Bzdok, Danilo (Fall)

    • (3-0-6)

  • BMDE 504 Biomaterials and Bioperformance (3 credits)

    Offered by: Biomedical Engineering (Faculty of Engineering)

    Overview

    Biomedical Engineering : Biological and synthetic biomaterials, medical devices, and the issues related to their bioperformance. The physicochemical characteristics of biomaterials in relation to their biocompatibility and sterilization.

    Terms: Winter 2023

    Instructors: Tabrizian, Maryam (Winter)

    • (3-0-6)

    • Restriction: Graduate and final-year undergraduate students from physical, biological and medical science, and engineering

  • BMDE 505 Cell and Tissue Engineering (3 credits)

    Offered by: Biomedical Engineering (Faculty of Engineering)

    Overview

    Biomedical Engineering : Application of the principles of engineering, physical, and biological sciences to modify and create cells and tissues for therapeutic applications will be discussed, as well as the industrial perspective and related ethical issues.

    Terms: Winter 2023

    Instructors: Prakash, Satya (Winter)

    • (3-0-6)

    • 1.5 hours lecture/1.5 hours seminar per week

    • Restriction: graduate and final year undergraduate students from physical, biological, and medical science, and engineering.

  • BMDE 508 Introduction to Micro and Nano-Bioengineering (3 credits)

    Offered by: Biomedical Engineering (Faculty of Engineering)

    Overview

    Biomedical Engineering : The micro and nanotechnologies that drive and support the miniaturization and parallelization of techniques for life sciences research, including different inventions, designs and engineering approaches that lead to new tools and methods for the life sciences - while transforming them - and help advance our knowledge of life.

    Terms: Fall 2022

    Instructors: Juncker, David (Fall)

    • (3-0-6)

    • Prerequisite: Permission of instructor

    • This course is intended for graduate and advanced undergraduate students having a biological/medical background or an engineering, physical sciences background. Engineering students enrolled in the Minor in Biomedical Engineering, or Honours in Electrical Engineering and Honours in Mechanical Engineering, should be particularly interested.

  • BMDE 525D1 Design of Assistive Technologies: Principles and Praxis (3 credits)

    Offered by: Biomedical Engineering (Faculty of Engineering)

    Overview

    Biomedical Engineering : This is an interdisciplinary, project-based course, centred around a design project in which small teams of students work closely with a person with a disability in the Montreal area to design a device, piece of equipment, app, or other solution that reduces their experience of disability.

    Terms: This course is not scheduled for the 2022-2023 academic year.

    Instructors: There are no professors associated with this course for the 2022-2023 academic year.

    • Students must also register for BMDE 525D2

    • No credit will be given for this course unless both BMDE 525D1 and BMDE 525D2 are successfully completed in consecutive terms

    • Restriction(s): Not open to students who have taken BMDE 625D1/D2. Not open to students in Physical and Occupational Therapy.

  • BMDE 525D2 Design of Assistive Technologies: Principles and Praxis (3 credits)

    Offered by: Biomedical Engineering (Faculty of Engineering)

    Overview

    Biomedical Engineering : See BMDE 525D1 for description.

    Terms: This course is not scheduled for the 2022-2023 academic year.

    Instructors: There are no professors associated with this course for the 2022-2023 academic year.

    • Prerequisite: BMDE 525D1

    • No credit will be given for this course unless both BMDE 525D1 and BMDE 525D2 are successfully completed in consecutive terms

  • BMDE 650 Advanced Medical Imaging (3 credits)

    Offered by: Biomedical Engineering (Faculty of Medicine and Health Sciences)

    Administered by: Graduate Studies

    Overview

    Biomedical Engineering : Review of advanced techniques in medical imaging including: fast magnetic resonance imaging (MRI), functional MRI, MR angiography and quantitative flow measurement, spiral and dynamic x-ray computed tomography, 2D/3D positron emission tomography (PET), basic PET physiology, tracer kinetics, surgical planning and guidance, functional and anatomical brain mapping, 2D and 3D ultrasound imaging, and medical image processing.

    Terms: Winter 2023

    Instructors: Collins, Louis (Winter)

  • BMDE 654 Biomedical Regulatory Affairs - Medical Devices (3 credits)

    Offered by: Biomedical Engineering (Faculty of Medicine and Health Sciences)

    Administered by: Graduate Studies

    Overview

    Biomedical Engineering : Regulatory strategies and quality management systems are critical for medical device development. This course provides an overview of regulatory requirements, and familiarize students with the important ISO and IEC standards pertaining to medical device development. This course will provide biomedical engineers with an understanding of the regulatory and quality requirements to translate a medical device idea into a commercial product, and will draw upon the expertise of invited speakers currently working in the medical devices industry.

    Terms: Fall 2022

    Instructors: Kroo, Danny (Fall)

Remaining complementary course credits must come from core or non-core complementary courses chosen from BBME courses or from other courses, at the 500 level or higher. The selection of courses must have the prior written approval of the Graduate Program Director.

Interfaculty Studies—2022-2023 (last updated Aug. 24, 2022) (disclaimer)
Back to top