Note: This is the 2010–2011 edition of the eCalendar. Update the year in your browser's URL bar for the most recent version of this page, or click here to jump to the newest eCalendar.
Department of Mechanical Engineering
Location
Location
- Macdonald Engineering Building, Room 270
- 817 Sherbrooke Street West
- Montreal, Quebec H3A 2K6
- Telephone: 514-398-6296
- Fax: 514-398-7365
- Website: www.mcgill.ca/mecheng
About the Department of Mechanical Engineering
About the Department of Mechanical Engineering
Mechanical engineers are traditionally concerned with the conception, design, implementation and operation of mechanical systems. Typical fields of work are aerospace, energy, manufacturing, machinery, and transportation. Because of the very broad nature of the discipline there is usually a high demand for mechanical engineers.
Many mechanical engineers follow other career paths. Graduate studies are useful for the specialists working in research establishments, consulting firms, or in corporate research and development.
To prepare the mechanical engineer for a wide range of career possibilities, there is a heavy emphasis in our curriculum on the fundamental analytical disciplines. This is balanced by a sequence of experimental and design engineering courses which include practice in design, manufacturing and experimentation. In these courses students learn how to apply their analytical groundwork to the solution of practical problems.
Concentrations in Aeronautical Engineering, Mechatronics, and Design are available for students in either the regular or honours program who wish to specialize in these areas.
While the program is demanding, there is time for many extracurricular activities. Students are active in such professional societies as CASI (Canadian Aeronautics and Space Institute), SAE (Society of Automotive Engineers), and ASME (American Society of Mechanical Engineers) and in various campus organizations.
Relations between faculty and students are extremely close. Social functions, at which students and professors meet to exchange views and get to know each other better, are organized frequently.
Jump To:
- Department of Mechanical Engineering Faculty
- Bachelor of Engineering (B.Eng.) - Mechanical Engineering (112 credits)
- Bachelor of Engineering (B.Eng.) - Honours Mechanical Engineering (112 credits)
- Bachelor of Engineering (B.Eng.) - Mechanical Engineering - Aeronautical Engineering (15 credits)
- Bachelor of Engineering (B.Eng.) - Honours Mechanical Engineering - Aeronautical Engineering (15 credits)
- Bachelor of Engineering (B.Eng.) - Mechanical Engineering - Design (15 credits)
- Bachelor of Engineering (B.Eng.) - Honours Mechanical Engineering - Design (15 credits)
- Bachelor of Engineering (B.Eng.) - Mechanical Engineering - Mechatronics (18 credits)
- Bachelor of Engineering (B.Eng.) - Honours Mechanical Engineering - Mechatronics (18 credits)
Department of Mechanical Engineering Faculty
Department of Mechanical Engineering Faculty
Chair |
---|
George Haller |
Emeritus Professors |
---|
Abdul M. Ahmed; B.Sc.(Dhaka), M.Eng., Ph.D.(McG.), Eng. (Thomas Workman Emeritus Professor of Mechanical Engineering) |
Romuald Knystautas; B.Eng., M.Eng., Ph.D.(McG.), Eng. |
Michael P. PaÑ—doussis; B.Eng.(McG.), Ph.D.(Camb.), Eng., F.I.Mech.E., F.A.S.M.E., F.A.A.M., F.C.S.M.E., F.R.S.C., F.C.A.E. (Thomas Workman Emeritus Professor of Mechanical Engineering) |
Stuart J. Price; B.Sc., Ph.D.(Brist.), P.Eng. |
Post-Retirement |
---|
Lucjan Kops; B.Eng., M.Eng., D.Sc.Eng.(Krakow Tech.), Eng., F.C.I.R.P., F.A.S.M.E., F.C.S.M.E., M.S.M.E. |
Professors |
---|
Marco Amabili; B.Eng.(Ancona), Ph.D.(Bologna) (Tier 1 Canada Research Chair) |
Jorge Angeles; B.Eng., M.Eng.(UNAM Mexico), Ph.D.(Stan.), Eng., F.A.S.M.E., F.C.S.M.E., F.R.S.C. (James Â鶹AV Professor) |
Bantwal R. Baliga; B.Tech.(IIT, Kanpur), M.Sc.(Case West.), Ph.D.(Minn.) |
Eliot Fried; A.B.(Calif., Berk.), M.S., Ph.D.(Cal. Tech.) (Tier 1 Canada Research Chair) |
Wagdi G. Habashi; B.Eng., M.Eng.(McG.), Ph.D.(C'nell), P.Eng., F.C.A.E., F.A.S.M.E., F.R.S.C. (NSERC-J. Armand Bombardier-Bell-Helicopter Industrial Research Chair in Multidisciplinary CFD) |
John H.S. Lee; B.Eng.(McG.), M.Sc.(MIT), Ph.D.(McG.), P.Eng. F.R.S.C. |
George Haller; M.S.(Budapest Tech.), Ph.D.(Cal. Tech.) (Faculty of Engineering Distinguished Professor) |
Dan Mateescu; M.Eng.(Univ-Poli. Bucharest), Ph.D.(Rom. Acad. Sci.), Doctor Honoris Causa(Univ-Poli.Bucharest), F.C.A.S.I., A.F.A.I.A.A., Erskine Fellow(Cant.) |
Arun K. Misra; B.Tech.(IIT, Kharagpur), Ph.D.(Br. Col.), P.Eng., F.A.A.S., A.F.A.I.A.A. (Thomas Workman Professor of Mechanical Engineering) |
Luc Mongeau; B.S.M.E., M.S.(École Poly., Montr.), Ph.D.(Penn. St.) (Tier 1 Canada Research Chair), Associate Dean, Academic Affairs, Director, Graduate Â鶹AV and Scholarships |
Christophe Pierre; B.Eng.(École Centrale, Paris), M.Sc.(Prin.), Ph.D.(Duke) (Tier 1 Canada Research Chair), Dean, Faculty of Engineering |
Associate Professors |
---|
Luca Cortelezzi; M.Sc., Ph.D.(Cal. Tech.) |
David L. Frost; B.A.Sc.(Br. Col.), M.S., Ph.D.(Cal. Tech.), P.Eng., Graduate Program Director |
Andrew J. Higgins; B.Sc.(Ill.), M.S., Ph.D.(Wash.) |
Pascal Hubert; B.Eng., M.Sc.(École Poly., Montr.), Ph.D.(Br. Col.), P.Eng. (Canada Research Chair), Aerospace Program Coordinator |
Jozsef Kövecses; M.Sc.(U. Miskolc), Ph.D.(Hung. Acad. Sci.), P.Eng. |
Tim Lee; M.S.(Port. St.), Ph.D.(Idaho) |
Larry B. Lessard; B.Eng.(McG.), M.Sc., Ph.D.(Stan.), P.Eng., Undergraduate Program Director, Honours Program Director |
R. Mongrain; B.Sc., M.Sc.(Montr.), Ph.D.(École Poly., Montr.), Eng. (William Dawson Scholar) |
Laurent Mydlarski; B.A.Sc.(Wat.), Ph.D.(C'nell), Eng. |
Siva Nadarajah; B.Sc.(Math), B.Sc.(Aero.Eng.)(Kansas), M.Sc., Ph.D.(Stan.) |
Meyer Nahon; B.Sc.(Qu.), M.Sc.(Tor.), Ph.D.(McG.), P.Eng., Associate Dean, Graduate and Postdoctoral Studies |
Peter Radziszewski; B.A.Sc.(Br. Col.), M.Sc., Ph.D.(Laval), Ing. |
Inna Sharf; B.A.Sc., Ph.D.(Tor.), P.Eng. |
Vince Thomson; B.Sc.(Windsor), Ph.D.(McM.) (Werner Graupe Professor of Manufacturing Automation) |
Evgeny V. Timofeev; M.Sc., Ph.D.(STU, St. Peters.), Eng., A.F.A.I.A.A. |
Srikar T. Vengallatore; B.Tech.(BHU), Ph.D.(MIT) (Canada Research Chair) Associate Chair |
Paul J. Zsombor-Murray; B.Eng., M.Eng., Ph.D.(McG.), Eng., F.C.S.M.E. |
Assistant Professors |
---|
Francois Barthelat; M.Sc.(Roch.), Ph.D.(N'western) |
Jeffrey M. Bergthorson; B.Sc.(Man.), M.Sc., Ph.D.(Cal. Tech.), P.Eng. |
Damiano Pasini; M.Sc.(Pavia), Ph.D.(Brist.), P.Ing. |
Laboratory Superintendents |
---|
A. Micozzi |
G. Savard |
G. Tewfik |
Adjunct Professors/Course Lecturers |
---|
H. Attia |
A. Segall |
R. Sumner |
D. Zorbas |
Bachelor of Engineering (B.Eng.) - Mechanical Engineering (112 credits)
To prepare the mechanical engineer for a wide range of career possibilities, there is a heavy emphasis in our curriculum on the fundamental analytical disciplines. This is balanced by a sequence of experimental and design engineering courses which include practice in design, manufacturing and experimentation. In these courses students learn how to apply their analytical groundwork to the solution of practical problems.
Special interests are satisfied by selecting appropriate complementary courses from among those offered with a specific subject concentration, such as management, industrial engineering, computer science, controls and robotics, bio-engineering, aeronautics, combustion, systems engineering, etc.
Required Year 0 (Freshman) Courses
30 credits
Generally, students admitted to Engineering from Quebec CEGEPs are granted transfer credit for these Year 0 (Freshman) courses (except FACC 100).
For information on transfer credit for French Baccalaureate, International Baccalaureate exams, Advanced Placement exams, Advanced Levels and Science Placement Exams, see /engineering/student/sao/newstudents and select your term of admission.
CHEM 110 | (4) | General Chemistry 1 |
CHEM 120 | (4) | General Chemistry 2 |
FACC 100 | (1) | Introduction to the Engineering Profession |
MATH 133 | (3) | Linear Algebra and Geometry |
MATH 140* | (3) | Calculus 1 |
MATH 141 | (4) | Calculus 2 |
PHYS 131 | (4) | Mechanics and Waves |
PHYS 142 | (4) | Electromagnetism and Optics |
AND 3 credits selected from the approved list of courses in Humanities and Social Sciences, Management Studies and Law, listed below under Complementary Studies (Group B).
*Students may take MATH 139 (Calculus) instead of MATH 140, but only with permission from the Department of Mathematics and Statistics.
Required Non-Departmental Courses
33 credits
CCOM 206 | (3) | Communication in Engineering |
CIVE 207 | (4) | Solid Mechanics |
COMP 208 | (3) | Computers in Engineering |
ECSE 461 | (3) | Electric Machinery |
FACC 100 | (1) | Introduction to the Engineering Profession |
FACC 400 | (1) | Engineering Professional Practice |
MATH 262 | (3) | Intermediate Calculus |
MATH 263 | (3) | Ordinary Differential Equations for Engineers |
MATH 264 | (3) | Advanced Calculus for Engineers |
MATH 271 | (3) | Linear Algebra and Partial Differential Equations |
MIME 260 | (3) | Materials Science and Engineering |
MIME 310 | (3) | Engineering Economy |
Required Mechanical Engineering Courses
64 credits
MECH 201 | (2) | Introduction to Mechanical Engineering |
MECH 210 | (2) | Mechanics 1 |
MECH 220 | (4) | Mechanics 2 |
MECH 240 | (3) | Thermodynamics 1 |
MECH 260 | (2) | Machine Tool Laboratory |
MECH 262 | (3) | Statistics and Measurement Laboratory |
MECH 289 | (3) | Design Graphics |
MECH 292 | (3) | Conceptual Design |
MECH 309 | (3) | Numerical Methods in Mechanical Engineering |
MECH 314 | (3) | Dynamics of Mechanisms |
MECH 315 | (4) | Mechanics 3 |
MECH 321 | (3) | Mechanics of Deformable Solids |
MECH 331 | (3) | Fluid Mechanics 1 |
MECH 341 | (3) | Thermodynamics 2 |
MECH 346 | (3) | Heat Transfer |
MECH 362 | (2) | Mechanical Laboratory 1 |
MECH 383 | (3) | Applied Electronics and Instrumentation |
MECH 393 | (3) | Machine Element Design |
MECH 412 | (3) | Dynamics of Systems |
MECH 430 | (3) | Fluid Mechanics 2 |
MECH 463D1 | (3) | Mechanical Engineering Project |
MECH 463D2 | (3) | Mechanical Engineering Project |
6 credits at the 300-level or higher, chosen from Mechanical Engineering courses (subject code MECH). One of these two courses (3 credits) must be from the following list:
CHEE 563* | (3) | Biofluids and Cardiovascular Mechanics |
MECH 497 | (3) | Value Engineering |
MECH 498 | (3) | Interdisciplinary Design Project 1 |
MECH 499 | (3) | Interdisciplinary Design Project 2 |
MECH 513 | (3) | Control Systems |
MECH 524 | (3) | Computer Integrated Manufacturing |
MECH 528 | (3) | Product Design |
MECH 541 | (3) | Kinematic Synthesis |
MECH 543 | (3) | Design with Composite Materials |
MECH 553 | (3) | Design and Manufacture of Microdevices |
MECH 554 | (3) | Microprocessors for Mechanical Systems |
MECH 557 | (3) | Mechatronic Design |
MECH 563* | (3) | Biofluids and Cardiovascular Mechanics |
MECH 565 | (3) | Fluid Flow and Heat Transfer Equipment |
MECH 573 | (3) | Mechanics of Robotic Systems |
MECH 577 | (3) | Optimum Design |
MECH 593 | (3) | Design Theory and Methodology |
*Students select either CHEE 563 or MECH 563
3 credits chosen from courses at the 300-level or higher in the Faculty of Engineering (including MECH courses) or from courses in the Faculty of Science, including MATH courses, approved by the Department.
Group A - Impact of Technology on Society
3 credits from the following:
ANTH 212 | (3) | Anthropology of Development |
BTEC 502 | (3) | Biotechnology Ethics and Society |
CHEE 430 | (3) | Technology Impact Assessment |
CIVE 469 | (3) | Infrastructure and Society |
ECON 225 | (3) | Economics of the Environment |
ECON 347 | (3) | Economics of Climate Change |
ENVR 201 | (3) | Society and Environment |
GEOG 200 | (3) | Geographical Perspectives: World Environmental Problems |
GEOG 203 | (3) | Environmental Systems |
GEOG 205 | (3) | Global Change: Past, Present and Future |
GEOG 302 | (3) | Environmental Management 1 |
MECH 526 | (3) | Manufacturing and the Environment |
MGPO 440 | (3) | Strategies for Sustainability |
MIME 308 | (3) | Social Impact of Technology |
PHIL 343 | (3) | Biomedical Ethics |
RELG 270 | (3) | Religious Ethics and the Environment |
SOCI 235 | (3) | Technology and Society |
SOCI 312 | (3) | Sociology of Work and Industry |
URBP 201 | (3) | Planning the 21st Century City |
Group B - Humanities and Social Sciences, Management Studies and Law
3 credits at the 200-level or higher from the following departments:
Anthropology (ANTH)
Economics (any 200- or 300-level course excluding ECON 208, ECON 217, ECON 227 and ECON 337)
History (HIST)
Philosophy (excluding PHIL 210 and PHIL 310)
Political Science (POLI)
Psychology (excluding PSYC 204 and PSYC 305, but including PSYC 100)
Religious Studies (RELG)
School of Social Work (SWRK)
Sociology (excluding SOCI 350)
OR one of the following:
ARCH 350 | (3) | The Material Culture of Canada |
BUSA 465* | (3) | Technological Entrepreneurship |
ENVR 203 | (3) | Knowledge, Ethics and Environment |
ENVR 400 | (3) | Environmental Thought |
FACC 220 | (3) | Law for Architects and Engineers |
FACC 500 | (3) | Technology Business Plan Design |
FACC 501 | (3) | Technology Business Plan Project |
INDR 294* | (3) | Introduction to Labour-Management Relations |
MATH 338 | (3) | History and Philosophy of Mathematics |
MGCR 222* | (3) | Introduction to Organizational Behaviour |
MGCR 352* | (3) | Marketing Management 1 |
MRKT 360* | (3) | Marketing of Technology |
ORGB 321* | (3) | Leadership |
ORGB 423* | (3) | Human Resources Management |
*Note: Management courses have limited enrolment and registration dates. See Important Dates at /importantdates.
Language Courses
If you are not proficient in a certain language, 3 credits will be given for one 6-credit course in that language.
However, 3 credits may be given for any language course that has a sufficient cultural component. You must have this course approved by a faculty adviser.
Typical Program of Study
Students entering the program from CEGEP follow a different curriculum than those entering from out of province. Students will be advised by the Department as to which courses they should select from the course lists above.
For a detailed curriculum, please see /mecheng/undergrad/curriculum.
For all minors and concentrations, students should complete a Course Authorization Form, available from the Student Affairs Office (Engineering Student Center) or from the Undergraduate Program Secretary, indicating their intention to take the minor or the concentration.
Bachelor of Engineering (B.Eng.) - Honours Mechanical Engineering (112 credits)
To prepare the mechanical engineer for a wide range of career possibilities, there is a heavy emphasis in our curriculum on the fundamental analytical disciplines. This is balanced by a sequence of experimental and design engineering courses which include practice in design, manufacturing and experimentation. In these courses students learn how to apply their analytical groundwork to the solution of practical problems.
The Honours program is particularly suitable for those with a high aptitude in mathematics and physics and gives a thorough grounding in the basic engineering sciences.
Special interests are satisfied by selecting appropriate complementary courses from among those offered with a specific subject concentration, such as management, industrial engineering, computer science, controls and robotics, bio-engineering, aeronautics, combustion, systems engineering, etc.
Required Year 0 (Freshman) Courses
30 credits
Generally, students admitted to Engineering from Quebec CEGEPs are granted transfer credit for these Year 0 (Freshman) courses (except FACC 100).
For information on transfer credit for French Baccalaureate, International Baccalaureate exams, Advanced Placement exams, Advanced Levels and Science Placement Exams, see /engineering/student/sao/newstudents and select your term of admission.
CHEM 110 | (4) | General Chemistry 1 |
CHEM 120 | (4) | General Chemistry 2 |
FACC 100 | (1) | Introduction to the Engineering Profession |
MATH 133 | (3) | Linear Algebra and Geometry |
MATH 140* | (3) | Calculus 1 |
MATH 141 | (4) | Calculus 2 |
PHYS 131 | (4) | Mechanics and Waves |
PHYS 142 | (4) | Electromagnetism and Optics |
AND 3 credits selected from the approved list of courses in Humanities and Social Sciences, Management Studies and Law, listed below under Complementary Studies (Group B).
*Students may take MATH 139 (Calculus) instead of MATH 140, but only with permission from the Department of Mathematics and Statistics.
Required Non-Departmental Courses
27 credits
CCOM 206 | (3) | Communication in Engineering |
CIVE 207 | (4) | Solid Mechanics |
COMP 208 | (3) | Computers in Engineering |
FACC 100 | (1) | Introduction to the Engineering Profession |
FACC 400 | (1) | Engineering Professional Practice |
MATH 262 | (3) | Intermediate Calculus |
MATH 263 | (3) | Ordinary Differential Equations for Engineers |
MATH 264 | (3) | Advanced Calculus for Engineers |
MATH 271 | (3) | Linear Algebra and Partial Differential Equations |
MIME 310 | (3) | Engineering Economy |
Required Mechanical Engineering Courses
61 credits
MECH 201 | (2) | Introduction to Mechanical Engineering |
MECH 210 | (2) | Mechanics 1 |
MECH 220 | (4) | Mechanics 2 |
MECH 240 | (3) | Thermodynamics 1 |
MECH 260 | (2) | Machine Tool Laboratory |
MECH 262 | (3) | Statistics and Measurement Laboratory |
MECH 289 | (3) | Design Graphics |
MECH 292 | (3) | Conceptual Design |
MECH 309 | (3) | Numerical Methods in Mechanical Engineering |
MECH 321 | (3) | Mechanics of Deformable Solids |
MECH 331 | (3) | Fluid Mechanics 1 |
MECH 341 | (3) | Thermodynamics 2 |
MECH 346 | (3) | Heat Transfer |
MECH 362 | (2) | Mechanical Laboratory 1 |
MECH 383 | (3) | Applied Electronics and Instrumentation |
MECH 403D1 | (3) | Thesis (Honours) |
MECH 403D2 | (3) | Thesis (Honours) |
MECH 404 | (3) | Honours Thesis 2 |
MECH 419 | (4) | Advanced Mechanics of Systems |
MECH 430 | (3) | Fluid Mechanics 2 |
MECH 494 | (3) | Honours Design Project |
Complementary Courses
24 credits
3 credits from the following, chosen with the approval of either the thesis supervisor or the coordinator of the honours program, when a thesis supervisor has not yet been secured:
MATH 327 | (3) | Matrix Numerical Analysis |
MATH 381 | (3) | Complex Variables and Transforms |
MATH 417 | (3) | Mathematical Programming |
6 credits at the 300-level or higher, chosen from Mechanical Engineering courses (subject code MECH). One of these two courses (3 credits) must be from the following list:
CHEE 563* | (3) | Biofluids and Cardiovascular Mechanics |
MECH 497 | (3) | Value Engineering |
MECH 498 | (3) | Interdisciplinary Design Project 1 |
MECH 499 | (3) | Interdisciplinary Design Project 2 |
MECH 513 | (3) | Control Systems |
MECH 524 | (3) | Computer Integrated Manufacturing |
MECH 526 | (3) | Manufacturing and the Environment |
MECH 528 | (3) | Product Design |
MECH 541 | (3) | Kinematic Synthesis |
MECH 543 | (3) | Design with Composite Materials |
MECH 553 | (3) | Design and Manufacture of Microdevices |
MECH 554 | (3) | Microprocessors for Mechanical Systems |
MECH 557 | (3) | Mechatronic Design |
MECH 563* | (3) | Biofluids and Cardiovascular Mechanics |
MECH 565 | (3) | Fluid Flow and Heat Transfer Equipment |
MECH 573 | (3) | Mechanics of Robotic Systems |
MECH 577 | (3) | Optimum Design |
MECH 593 | (3) | Design Theory and Methodology |
*Students choose either CHEE 563 or MECH 563.
3 credits chosen from courses at the 300-level or higher in the Faculty of Engineering (including MECH courses) or MIME 360 or from courses in the Faculty of Science, including MATH courses, approved by the Department.
Group A - Impact of Technology on Society
3 credits from the following:
ANTH 212 | (3) | Anthropology of Development |
BTEC 502 | (3) | Biotechnology Ethics and Society |
CHEE 430 | (3) | Technology Impact Assessment |
CIVE 469 | (3) | Infrastructure and Society |
ECON 225 | (3) | Economics of the Environment |
ECON 347 | (3) | Economics of Climate Change |
ENVR 201 | (3) | Society and Environment |
GEOG 200 | (3) | Geographical Perspectives: World Environmental Problems |
GEOG 203 | (3) | Environmental Systems |
GEOG 205 | (3) | Global Change: Past, Present and Future |
GEOG 302 | (3) | Environmental Management 1 |
MECH 526 | (3) | Manufacturing and the Environment |
MGPO 440 | (3) | Strategies for Sustainability |
MIME 308 | (3) | Social Impact of Technology |
PHIL 343 | (3) | Biomedical Ethics |
RELG 270 | (3) | Religious Ethics and the Environment |
SOCI 235 | (3) | Technology and Society |
SOCI 312 | (3) | Sociology of Work and Industry |
URBP 201 | (3) | Planning the 21st Century City |
Group B: Humanities and Social Sciences, Management Studies and Law
3 credits at the 200-level or higher from the following departments:
Anthropology (ANTH)
Economics (any 200- or 300-level course excluding ECON 208, ECON 217, ECON 227 and ECON 337)
History (HIST)
Philosophy (excluding PHIL 210 and PHIL 310)
Political Science (POLI)
Psychology (excluding PSYC 204 and PSYC 305, but including PSYC 100)
Religious Studies (RELG)
School of Social Work (SWRK)
Sociology (excluding SOCI 350)
OR one of the following:
ARCH 350 | (3) | The Material Culture of Canada |
BUSA 465* | (3) | Technological Entrepreneurship |
ENVR 203 | (3) | Knowledge, Ethics and Environment |
ENVR 400 | (3) | Environmental Thought |
FACC 220 | (3) | Law for Architects and Engineers |
FACC 500 | (3) | Technology Business Plan Design |
FACC 501 | (3) | Technology Business Plan Project |
INDR 294* | (3) | Introduction to Labour-Management Relations |
MATH 338 | (3) | History and Philosophy of Mathematics |
MGCR 222* | (3) | Introduction to Organizational Behaviour |
MGCR 352* | (3) | Marketing Management 1 |
MRKT 360* | (3) | Marketing of Technology |
ORGB 321* | (3) | Leadership |
ORGB 423* | (3) | Human Resources Management |
*Note: Management courses have limited enrolment and registration dates. See Important Dates at /importantdates.
Language Courses
If you are not proficient in a certain language, 3 credits will be given for one 6-credit course in that language.
However, 3 credits may be given for any language course that has a sufficient cultural component. You must have this course approved by a faculty adviser.
Typical Program of Study
Students entering the program from CEGEP follow a different curriculum than those entering from out of province. Students will be advised by the Department as to which courses they should select from the course lists above.
For a detailed curriculum, see /mecheng/undergrad/curriculum.
For all minors and concentrations, students should complete a Course Authorization Form, available from the Student Affairs Office (Engineering Student Center) or from the Undergraduate Program Secretary, indicating their intention to take the minor or concentration.
Bachelor of Engineering (B.Eng.) - Mechanical Engineering - Aeronautical Engineering (15 credits)
Students in this concentration take five courses in the area of Aeronautical Engineering. All courses must be passed with a grade of C or better.
Students should discuss their course selection with their adviser and complete a Course Authorization Form, available from the Student Affairs Office (Engineering Student Center) or from the Undergraduate Program Secretary, indicating their intention to take the concentration.
Bachelor of Engineering (B.Eng.) - Honours Mechanical Engineering - Aeronautical Engineering (15 credits)
Students in this concentration take five courses in the area of Aeronautical Engineering. All courses must be passed with a grade of C or better.
Students should discuss their course selection with their adviser and complete a Course Authorization Form, available from the Student Affairs Office (Engineering Student Center) or from the Undergraduate Program Secretary, indicating their intention to take the concentration.
Bachelor of Engineering (B.Eng.) - Mechanical Engineering - Design (15 credits)
Students in this concentration take five courses in the area of design, including the completion of an interdisciplinary project.
Students should complete a Course Authorization Form, available from the Student Affairs Office (Engineering Student Center) or from the Undergraduate Program Secretary, indicating their intention to take the concentration.
Total concentration credit weight: 15-16 credits.
Complementary Courses
9-10 credits from the following:
ARCH 515 | (3) | Sustainable Design |
CHEE 453 | (4) | Process Design |
MECH 497 | (3) | Value Engineering |
MECH 526 | (3) | Manufacturing and the Environment |
MECH 528 | (3) | Product Design |
MECH 530 | (3) | Mechanics of Composite Materials |
MECH 541 | (3) | Kinematic Synthesis |
MECH 543 | (3) | Design with Composite Materials |
MECH 554 | (3) | Microprocessors for Mechanical Systems |
MECH 557 | (3) | Mechatronic Design |
MECH 565 | (3) | Fluid Flow and Heat Transfer Equipment |
MECH 576 | (3) | Geometry in Mechanics |
MECH 577 | (3) | Optimum Design |
MECH 579 | (3) | Multidisciplinary Design Optimization |
MECH 593 | (3) | Design Theory and Methodology |
Bachelor of Engineering (B.Eng.) - Honours Mechanical Engineering - Design (15 credits)
Students in this concentration take five courses in the area of design, including the completion of an interdisciplinary project.
Students should complete a Course Authorization Form, available from the Student Affairs Office (Engineering Student Center) or from the Undergraduate Program Secretary, indicating their intention to take the concentration.
Total concentration credit weight: 15-16 credits.
Complementary Courses
9-10 credits from the following:
ARCH 515 | (3) | Sustainable Design |
CHEE 453 | (4) | Process Design |
MECH 497 | (3) | Value Engineering |
MECH 526 | (3) | Manufacturing and the Environment |
MECH 528 | (3) | Product Design |
MECH 530 | (3) | Mechanics of Composite Materials |
MECH 541 | (3) | Kinematic Synthesis |
MECH 543 | (3) | Design with Composite Materials |
MECH 554 | (3) | Microprocessors for Mechanical Systems |
MECH 557 | (3) | Mechatronic Design |
MECH 565 | (3) | Fluid Flow and Heat Transfer Equipment |
MECH 576 | (3) | Geometry in Mechanics |
MECH 577 | (3) | Optimum Design |
MECH 579 | (3) | Multidisciplinary Design Optimization |
MECH 593 | (3) | Design Theory and Methodology |
Bachelor of Engineering (B.Eng.) - Mechanical Engineering - Mechatronics (18 credits)
Students in this concentration take six courses in the area of control, robotics and/or CAD/CAM.
Students should complete a Course Authorization Form, available from the Student Affairs Office (Engineering Student Center) or from the Undergraduate Program Secretary, indicating their intention to take the concentration.
Bachelor of Engineering (B.Eng.) - Honours Mechanical Engineering - Mechatronics (18 credits)
Students in this concentration take six courses in the area of control, robotics and/or CAD/CAM.
Students should complete a Course Authorization Form, available from the Student Affairs Office (Engineering Student Center) or from the Undergraduate Program Secretary, indicating their intention to take the concentration.